DSA600: Difference between revisions

Jump to navigation Jump to search
1,455 bytes added ,  4 November 2016
no edit summary
(shown as new in 1990 catalog, no longer listed ion 1996 catalog)
No edit summary
Line 16: Line 16:
The '''Tektronix DSA601''' and '''DSA602''' are digital scopes with waveform processing capabilities from the 1990s.  
The '''Tektronix DSA601''' and '''DSA602''' are digital scopes with waveform processing capabilities from the 1990s.  
They accept up to three [[11000-series plug-ins]].  The display is a touchscreen, with a grid of infrared beams used as the sensor.
They accept up to three [[11000-series plug-ins]].  The display is a touchscreen, with a grid of infrared beams used as the sensor.
The CRT is a conventional magnetic deflection color computer monitor and operates at 552x704 resolution. 


Both instruments have [[GPIB interface|IEEE-488 (GPIB)]] and [[RS-232 interface]]s for remote control and waveform export.  
Both instruments have [[GPIB interface|IEEE-488 (GPIB)]] and [[RS-232 interface]]s for remote control and waveform export.  
There are "A" models that have a floppy drive for waveform storage.
There are "A" models that have a floppy drive for waveform storage.


{{MissingSpecs}}
{{BeginSpecs}}
{{Spec | Inputs | 3 amplifier bays, up to 12 channels (using [[11A34]] plug-ins) }}
{{Spec | Resolution | 8 bits; averaging of N acquisitions increases by log<sub>2</sub>(N) up to 14 bits }}
{{Spec | Display resolution | 50 pixels/Div }}
{{Spec | Sample rate | DSA601, max 1 GS/s; DSA602, max 2 GS/s (one channel, left plugin) <sup>Note 1</sup> }}
{{Spec | Record length | 512 to 32768 samples }}
{{Spec | Sweep rate | 50 ps/Div <sup>Note 2</sup> to 100 s/Div }}
{{Spec | ENOB | 7.2 bit up to 10 MHz, 6.3 bit @ 250 MHz, 5.7 bit @ 500 MHz, 4.5 bit @ 1 GHz }}
{{Spec | Screen | magnetic deflection color computer monitor, 10" diagonal (130 mm × 168 mm), 552×704 pixels, 22×11 infrared touch-screen grid }}
{{Spec | Power | 90-132 V or 180-250 V, 48-72 Hz, 465 W (DSA601A) / 585 W (DSA602A) }}
{{Spec | Features |
* Automated signal measurements (rise, fall, period, frequency, width, delay, phase, duty cycle etc.)
* Averaging
* "Act on Delta" acquisition
* X-Y mode
* FFT: complex, forward and reverse, max. 16384 points; windows: Rectangular, Bartlett, Hanning, Hamming, Blackman, Blackman-Harris }}
* Hardcopy to various Tek, Epson and HP printers or HPGL plotters, via RS-232, GPIB, parallel port or disk file
{{EndSpecs}}


The 8-bit digitizers in the DSA 601 and DSA 602 have a maximum rate of 500 MSamples/s.
Note 1:
The DSA 601 has two such digitizers and the DSA 602 has four.  The digitizers can
:The 8-bit digitizers in the DSA 601 and DSA 602 have a maximum rate of 500 MSamples/s. The DSA 601 has two such digitizers and the DSA 602 has four.  The digitizers can be used independently or can be ganged together in interleaved mode for higher sample rates.  Interleaving gives the DSA601 a single-channel maximum sample rate of 1 GSamples/s and the DSA602 2 GSamples/s (realtime). 
be used independently or can be ganged together in interleaved mode for higher
 
sample rates.  Interleaving gives the DSA601 a single-channel maximum sample rate of 1 GSamples/s
Note 2:
and the DSA602 2 GSamples/s.
:Using Effective Time sampling, the DSA602A resolution increases to 50 ps/div (effective sampling rate of 1000 GS/s).  Math operations allow averaging and calculation of statistics to extract the characteristics of the signal and its anomalies.


==Documents and Software==
==Documents and Software==
Line 89: Line 105:
[[Category:GPIB interface]]
[[Category:GPIB interface]]
[[Category:RS-232 interface]]
[[Category:RS-232 interface]]
[[Category:Parallel printer interface]]

Navigation menu