T: Difference between revisions

Jump to navigation Jump to search

T (view source)

Revision as of 04:33, 6 September 2017

12 bytes added ,  6 September 2017
no edit summary
No edit summary
No edit summary
Line 8: Line 8:
discontinued=1973 |
discontinued=1973 |
manuals=
manuals=
* [http://bama.edebris.com/manuals/tek/t/ Tektronix Type T Manual (BAMA, offline?)]
* [[Media:070-337.pdf|Tektronix Type T Manual (PDF)]]
* [http://w140.com/tek_fcp/tek_type_t_factory_cal_proc.pdf Tektronix Type T Factory Calibration Procedure (PDF)]
* [http://w140.com/tek_fcp/tek_type_t_factory_cal_proc.pdf Tektronix Type T Factory Calibration Procedure (PDF)]
}}
}}
The Tektronix Type T is a timebase plug-in primarily intended for use in the [[536]] X-Y scope.  It
The '''Tektronix Type T''' is a timebase plug-in primarily intended for use in the [[536]] X-Y scope.  It contains trigger and sweep circuitry.  The typical use of a Type T plug-in is as the X-axis plug-in in a 536, to make the 536 behave like a normal oscilloscope instead of an X-Y scope. However, there is no capability for internal triggering – a jumper must be connected from the Vertical Signal Out on the 536 to the External Trig on the T.  
contains trigger and sweep circuitry.  The typical use of a Type T plug-in is as the X-axis plug-in  
in a 536.  This configuration makes the 536 behave like a normal oscilloscope instead of an X-Y scope. However, there is no capability for internal triggering. A jumper must be connected from the Vertical Signal Out on the 536 to the External Trig on the T.  


If you put a Type T in a vertical slot of a normal [[500-series scopes|500-series scope]],
Plugging a Type T in a vertical slot of a normal [[500-series scopes|500-series scope]]  
you can make a raster, and using the scope's Z-axis input this allows a crude video display.
produces a raster, and using the scope's Z-axis input this allows a crude video display.


The banana jack on the back of the plugin is to provide retrace blanking when used in the horizontal slot of a [[536]]
The banana jack on the back of the plugin is to provide retrace blanking when used in the horizontal slot of a [[536]]


The Type T was [[introduced in 1957]] and dropped after 1972,
The Type T was [[introduced in 1957]] and dropped after 1972, the same as its primary host, the 536.
the same as its primary host, the 536.
(Types [[K]], [[L]], and [[T]] are tied for longest production life, at 16 years,
[[B]], [[D]], and [[G]] are next at 15 years.)


[[K]], [[L]], and [[T]] are tied for longest production life, at 16 years.
==Pictures==
[[B]], [[D]], and [[G]] are next at 15 years.


==Pictures==
<gallery>
Tek type t front.jpg|Front view
Tek_t.jpg|Catalog image
Type t front.jpg | front
Type t left.jpg | left side
Type t top.jpg| top view
Type t bottom.jpg| bottom view
Tek type t rear.jpg | read panel
Tek type t top.jpg | top view
Tek type t bottom.jpg | bottom view
</gallery>


<gallery>
<gallery>
Image:Tek type t front.jpg
Tek_t_trigger.png|Trigger schematic
Image:Tek_t.jpg|Front view
Tek_t_timebase.png|Timebase schematic
Image:Tek_t_trigger.png|Trigger schematic
Image:Tek_t_timebase.png|Timebase schematic
Image:Type t front.jpg
Image:Type t left.jpg
Image:Type t top.jpg
Image:Type t bottom.jpg
Image:Tek type t rear.jpg
Image:Tek type t top.jpg
Image:Tek type t bottom.jpg
</gallery>
</gallery>


[[Category:500 series plugins]]
[[Category:500 series plugins]]
Retrieved from "https://w140.com/tekwiki/wiki/Special:MobileDiff/27696"

Navigation menu