1A5: Difference between revisions

Jump to navigation Jump to search
40 bytes added ,  25 September 2018
no edit summary
No edit summary
No edit summary
Line 16: Line 16:
Type 1A5 was [[introduced in 1967]], replacing Types [[W]] and [[Z]], and lasted until the end of the 500-series scope line.
Type 1A5 was [[introduced in 1967]], replacing Types [[W]] and [[Z]], and lasted until the end of the 500-series scope line.


==Specifications==
{{BeginSpecs}}
Bandwidth is 50 MHz down to 5 mV/div.
{{Spec | Bandwidth | 50 MHz down to 5 mV/div, 40 MHz at 1 mV/div }}
The maximum differential sensitivity is 1 mV/div, with a bandwidth of 40 MHz.
{{Spec | Deflection | 1 mV/div to 20 V/div, 1−2−5 }}
Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20 MHz
{{Spec | Common-mode rejection | 20,000:1 at low frequencies, deteriorating to 200:1 at 20 MHz }}
{{EndSpecs}}


Like most Tektronix differential plug-ins, it has three modes:  
Like most Tektronix differential plug-ins, the 1A5 has three modes:  
V<sub>A</sub>-V<sub>C</sub>, V<sub>A</sub>-V<sub>B</sub>, and V<sub>C</sub>-V<sub>B</sub>.
V<sub>A</sub>−V<sub>C</sub>, V<sub>A</sub>−V<sub>B</sub>, and V<sub>C</sub>−V<sub>B</sub>.
V<sub>C</sub> is controlled by a ten-turn potentiometer and can vary from -5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges).   
 
V<sub>C</sub> is controlled by a ten-turn potentiometer and can vary from −5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges).   


[[Category:Specifications needed]]''please add''
[[Category:Specifications needed]]''please add''

Navigation menu