7000 Series plug-in interface: Difference between revisions

Jump to navigation Jump to search
no edit summary
No edit summary
No edit summary
Line 123: Line 123:
* ''Alt Drive'' − 0/+5 V; high level will display channel 2 of a dual-trace plug-in. low will display channel 1.
* ''Alt Drive'' − 0/+5 V; high level will display channel 2 of a dual-trace plug-in. low will display channel 1.
* ''Intensity Limit'' − Switched to ground by timebase in slow sweep speeds (≥100 ms/Div), limits beam intensity to protect the CRT [[phosphor]]
* ''Intensity Limit'' − Switched to ground by timebase in slow sweep speeds (≥100 ms/Div), limits beam intensity to protect the CRT [[phosphor]]
* ''Mainframe Channel Switch'', ''Mainframe Mode'' − 0/+5 V; plug-in output is displayed when MF Channel Switch <> MF Mode
* ''Mainframe Channel Switch'', ''Mainframe Mode'' − 0/+5 V logic levels; plug-in output is displayed when MF Channel Switch MF Mode (XOR)
* ''Sweep Inhibit'' −
* ''Sweep Inhibit'' −
* ''Delay Gate'' − negative-going pulse starting at the end of the delay period, and lasting until the end of the sweep from the delaying timebase. +Gate Output on mainframe uses Delay Gate from H slot B when Delay Gate is selected.  Grounded in amplifier plugins.
* ''Delay Gate'' − negative-going pulse starting at the end of the delay period, and lasting until the end of the sweep from the delaying timebase. +Gate Output on mainframe uses Delay Gate from H slot B when Delay Gate is selected.  Grounded in amplifier plugins.
2,038

edits

Navigation menu