39,707
edits
7S11: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
No edit summary |
||
| Line 18: | Line 18: | ||
For operation, a [[7T11]] or [[7S12]] plug-in is needed, to which the 7S11 connects through [[7000-series Sampling Shoe|contact strips on the right side of the plug-in]]. | For operation, a [[7T11]] or [[7S12]] plug-in is needed, to which the 7S11 connects through [[7000-series Sampling Shoe|contact strips on the right side of the plug-in]]. | ||
The control signals are routed to a similar strip on the left of the module for another 7S11 in a dual-channel configuration. | The control signals are routed to a similar strip on the left of the module for another 7S11 in a dual-channel configuration. | ||
An alternative configuration consists of a pair of 7S11s, one in the right vertical and the other in the A or only horizontal bay, for an X-Y display in free-running mode. | An alternative configuration consists of a pair of 7S11s, one in the right vertical and the other in the A or only horizontal bay, | ||
for an X-Y display in free-running mode (~50 kHz strobe). | |||
The DC offset voltage as well as the vertical display signal are accessible on the front panel through [[Pin Tip]] jacks. | The DC offset voltage as well as the vertical display signal are accessible on the front panel through [[Pin Tip]] jacks. | ||