P6032: Difference between revisions

Jump to navigation Jump to search
175 bytes added ,  31 October 2021
no edit summary
No edit summary
No edit summary
Line 1: Line 1:
{{Probe Sidebar
|manufacturer=Tektronix
|model=P6032
|summary=850 MHz cathode-follower probe
|for=1S1
|image=Tek p6032 kit 1.jpg
|caption=P6032
|introduced=(?)
|discontinued=(?)
|manuals=
* [[Media:070-327.pdf|Tektronix P6032 Manual (PDF)]] / [http://w140.com/kurt/p6032.djvu (DjVu)]
* [[Media:Tek_P6032_preliminary_manual_1962.pdf|Tektronix P6032 Preliminary Manual (PDF)]]
}}
The '''Tektronix P6032''' is an 850 MHz cathode-follower probe, intended for use with samplers such as the [[1S1]], [[3S1]], [[3S76]], [[4S1]], and [[4S2]].
The '''Tektronix P6032''' is an 850 MHz cathode-follower probe, intended for use with samplers such as the [[1S1]], [[3S1]], [[3S76]], [[4S1]], and [[4S2]].
It was designed by [[Murlan Kaufman]].
It was designed by [[Murlan Kaufman]].
Line 4: Line 17:
There is an [[EC1000]] subminiature triode in the probe body, which is why it gets slightly warm during operation.  
There is an [[EC1000]] subminiature triode in the probe body, which is why it gets slightly warm during operation.  


Like all active probes, the P6032 requires power, and for this reason it has two connectors at the scope end of cable.   
Like all active probes, the P6032 requires power, and for this reason it has two connectors at the scope end of the cable.   
There is a four-pin power connector and a 50 Ω [[GR-874 connector]] for the signal.   
There is a four-pin power connector and a 50 Ω [[GR-874 connector]] for the signal.   


Line 15: Line 28:


{{BeginSpecs}}
{{BeginSpecs}}
{{Spec | Bandwidth | 850 MHz }}
{{Spec | Bandwidth | ≥850 MHz }}
{{Spec | Rise time | 0.4 ns max. }}
{{Spec | Rise time | 0.4 ns max. }}
{{Spec | Attenuation |10× to 1000× in 1-2-5 steps with supplied attenuator heads, 3× without attenuator }}
{{Spec | Attenuation |10× to 1000× in 1-2-5 steps with supplied attenuator heads, 3× without attenuator }}
{{Spec | Dynamic range | ±0.15 V &times attenuation }}
{{Spec | Dynamic range | ±0.15 V × attenuation }}
{{Spec | Maximum input voltage | ±0.225 V &times attenuation, de-rated for CW operation for 500× and 1000× attenuator heads }}
{{Spec | Maximum input voltage | ±0.225 V × attenuation, de-rated for CW operation for 500× and 1000× attenuator heads }}
{{Spec | Input resistance | 10 MΩ with any attenuator head, 3 MΩ without attenuator head }}
{{Spec | Input resistance | 10 MΩ with any attenuator head, 3 MΩ without attenuator head }}
{{Spec | Input capacitance | 3.6 pF (10× head) to 1.3 pF (1000× head), 7 pF without attenuator head}}
{{Spec | Input capacitance | 3.6 pF (10× head) to 1.3 pF (1000× head), 7 pF without attenuator head}}
{{Spec | Output impedance | not specified, calibrated for 50 Ω load }}
{{Spec | Output impedance | not specified, calibrated for 50 Ω load }}
{{Spec | dc offset | ≈0.5 V (not adjustable)}}
{{Spec | DC offset | ≈0.5 V (not adjustable)}}
{{EndSpecs}}
{{EndSpecs}}
==Manuals==
* [[Media:070-327.pdf|Tektronix P6032 Manual (PDF)]] / [http://w140.com/kurt/p6032.djvu (DjVu)]
* [[Media:Tek_P6032_preliminary_manual_1962.pdf|Tektronix P6032 Preliminary Manual (PDF)]]


==Pictures==
==Pictures==
<gallery>
<gallery>
P6032_ext.jpg|External view of P6032 without attenuator attachment.
P6032_ext.jpg | External view of P6032 without attenuator attachment
P6032-schematic.png|P6032 Schematic
P6032-schematic.png | P6032 Schematic
P6032_int_c.jpg|Internal view of P6032  Probe tip connects directly to triode grid, which is a bare wire coming out of the top of the tube.  Clipping line runs along the body of the probe to the left of the tube socket.   
P6032_int_c.jpg | Internal view of P6032  Probe tip connects directly to triode grid, which is a bare wire coming out of the top of the tube.  Clipping line runs along the body of the probe to the left of the tube socket.   
P6032x10.jpg |  ×20 attenuator tip
P6032x10.jpg | ×20 attenuator tip
P6032_pwr.jpg|Internal view of power supply at end of P6032 cable. Signal coax passes through undisturbed.
P6032_pwr.jpg | Internal view of power supply connector. Signal coax passes through undisturbed.
P6032_risetime.jpg|Display on [[545|545A]] with 1S1 and P6032.  Pulse is generated by Tek [[284]] tunnel diode pulser driving into 50 ohm load, GR-BNC adaptor and then to the probe using a probe to BNC adaptor.  The 10x attenuator tip was used on the P6032.  Timebase is 200ps/div.  
P6032_risetime.jpg | Display on [[545|545A]] with 1S1 and P6032.  Pulse is generated by Tek [[284]] tunnel diode pulser driving into 50 Ω load, GR-BNC adaptor and then to the probe using a probe to BNC adaptor.  The 10x attenuator tip was used on the P6032.  Timebase is 200 ps/div.  
Tek p6032 kit 1.jpg
Tek p6032 kit 1.jpg
Tek p6032 kit 2.jpg
Tek p6032 kit 2.jpg

Navigation menu