C1001: Difference between revisions

C1001 (view source)

23 bytes added , 12 May 2022

no edit summary

36,756

edits

@@ Line 35: / Line 35: @@
 ==Connectors==
-According to [https://groups.io/g/TekScopes/topic/7628465 this posting] and verified by experiment, ''The camera has a 9-pin [[D-sub connector]] that takes in 12 V, around 300 mA at pins 1 (positive) and 3 (ground) and signal is on pins 4 (shield/ground) and 5 (video); there are two other pins used which bring in calibration voltages and go only to BNC and two test points. ''
+According to [https://groups.io/g/TekScopes/topic/7628465 this posting] and verified by experiment,
+<blockquote>
+The camera has a 9-pin [[D-sub connector]] that takes in 12 V, around 300 mA at pins 1 (positive) and 3 (ground) and signal is on pins 4 (shield/ground) and 5 (video).
+There are two other pins used which bring in calibration voltages and go only to BNC and two test points.
+</blockquote>
 ==Links==