84: Difference between revisions

84 (view source)

Revision as of 10:06, 19 November 2023

173 bytes added , 19 November 2023

no edit summary

Peter

Bureaucrats, Interface administrators, Suppressors, Administrators

41,016

edits

@@ Line 4: / Line 4: @@
 |type=84
 |summary=calibration fixture
-|image=Tek_84_Front.jpeg
+|image=Tek 067-0523-00 front.jpg
 |caption=Type 84
 |introduced=1962
@@ Line 10: / Line 10: @@
 |designers=John Gates;
 |manuals=
-* [http://w140.com/tek_84.pdf Tektronix Type 84 Manual (PDF)]
+* [[Media:070-0345-01.pdf|Tektronix 067-0523-00 Manual]] (OCR)
-* [[Media:067-0523-00 schematic.pdf|Tektronix 067-0523-00 Schematic (PDF)]]
+* [[Media:067-0523-00 schematic.pdf|Tektronix 067-0523-00 Schematic]]
-* [[Media:070-0345-01.pdf|Tektronix 067-0523-00 Manual (PDF, OCR)]]
 * [[Media:Tek 067-0523-00 fcp aug 1966.pdf|Tektronix 067-0523-00 Factory Calibration Procedure, August 1966]]
 }}
 The '''Tektronix Type 84''' is a calibration fixture plug-in for [[580-series scopes]].
-It was renamed the '''067-0523-00''' during production.  The Type 84 provides a
+It was renamed the '''067-0523-00''' during production (SN 974+).
-calibrated amplitude signal for adjusting gain, a fast-rise voltage step
-for adjusting the impulse response of the vertical amplifiers in the scope,
-and load resistors to test the power supply of the scope.  The fast-rise
-pulses are produced by a [[mercury switch]] and are specified to have a
-repetition rate of 550 to 750 pulses per second, with a rise time that is
-''"considerably less than the response time of the vertical amplifier in a 580-series oscilloscope." ''
-==Specifications==
+The Type 84 provides a calibrated amplitude signal for adjusting gain,
-[[Category:Specifications needed]] ''please add''
+a fast-rise voltage step – produced by a [[mercury switch]] – for adjusting the impulse response of the vertical amplifiers in the scope,
+and load resistors to test the power supply of the scope.
+It also features an external input to connect a time-mark generator during calibration.
+{{BeginSpecs}}
+{{Spec | Display signal | Calibration signal, fast-rise pulses, or external }}
+{{Spec | Calibration reference signal | 200 mV, front-panel check }}
+{{Spec | Pulse amplitude | Adjustable to plus or minus 4 cm deflection }}
+{{Spec | Pulse repetition rate | 550 to 750 pulses per second }}
+{{Spec | Pulse rise time | "considerably less than the response time of the vertical amplifier in a 580-series oscilloscope." |
 ==Pictures==