P6406: Difference between revisions

Latest revision as of 04:22, 20 August 2021

Tektronix P6406
16-channel word recognizer probe Tektronix P6406 Word Recognizer Probe for Sony/Tektronix 308 Logic Analyzer Compatible with 308 Produced from 1980 to (?) Manuals Tek 308 Service manual + probes (PDF, OCR, 19MB)

Manuals – Specifications – Links – Pictures

The Tektronix P6406 is a 16-channel word recognizer probe for the 308 logic analyzer.

The P6406 uses the P64xx-family 10-wire input lead harnesses with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.

Key Specifications

please add

Internals

The 16 inputs connect (via 330 Ω resistors) to inputs of four 74LS266 quad exclusive-NOR gates that receive bit-inversion masks from two of three 74LS164 serial-in, parallel-out shift registers. The third shift register provides don't care masks (one per group of four inputs). After the logic circuits, a 74S140 cable driver sends the trigger signal to the 308.

Links

P6406 @ barrytech.com

Pictures

P6406 probe
P6406 case close-up
P6406 PCB front
P6406 PCB back
Using P6406/P6451 probes with jumper wires

@@ Line 1: / Line 1: @@
+{{Probe Sidebar
+|manufacturer=Tektronix
+|model=P6406
+|summary=16-channel word recognizer probe
+|for=308
+|image=P6406-1.jpg
+|caption=Tektronix P6406 Word Recognizer Probe for [[308|Sony/Tektronix 308 Logic Analyzer]]
+|introduced=1980
+|discontinued=(?)
+|manuals=
+* [[Media:Tek_308_logic_analyzer_+_probes_(1979)_SM.pdf|Tek 308 Service manual + probes]] (PDF, OCR, 19MB)
+}}
 The '''Tektronix P6406''' is a 16-channel word recognizer probe for the [[308]] logic analyzer.
-It uses the [[012-0747-00]] cable harness to connect to the data source, like the [[P6451]].
+The P6406 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors.  Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
-The 16 inputs connect to four 74LS266 exclusive-NOR gates that receive bit-inversion masks from two of
+{{MissingSpecs}}
-three 74LS164 serial-in, parallel-out shift registers. The third provides don't care masks (one per group of four inputs).
-After the logic circuits, a 74S140 cable driver sends the trigger signal to the 308.
+==Internals==
+The 16 inputs connect (via 330 Ω resistors) to inputs of four 74LS266 quad exclusive-NOR gates that receive bit-inversion masks from two of three 74LS164 serial-in, parallel-out shift registers. The third shift register provides don't care masks (one per group of four inputs).  After the logic circuits, a 74S140 cable driver sends the trigger signal to the 308.
 ==Links==
-* [http://www.barrytech.com/tektronix/probes/tekp6406.html P6408 @ barrytech.com]
+* [http://www.barrytech.com/tektronix/probes/tekp6406.html P6406 @ barrytech.com]
 ==Pictures==
 <gallery>
-p6406-1.jpg
+p6406-1.jpg | P6406 probe
-p6406-2.jpg
+p6406-2.jpg | P6406 case close-up
-p6406-3.jpg
+p6406-3.jpg | P6406 PCB front
-p6406-4.jpg
+p6406-4.jpg | P6406 PCB back
-p6406-5.jpg
+P64xx-jumper.jpg | Using P6406/[[P6451]] probes with jumper wires
 </gallery>
 [[Category:Logic analyzer probes]]