P6406: Difference between revisions
No edit summary |
No edit summary |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Probe Sidebar | |||
|manufacturer=Tektronix | |||
|model=P6406 | |||
|summary=16-channel word recognizer probe | |||
|for=308 | |||
|image=P6406-1.jpg | |||
|caption=Tektronix P6406 Word Recognizer Probe for [[308|Sony/Tektronix 308 Logic Analyzer]] | |||
|introduced=1980 | |||
|discontinued=(?) | |||
|manuals= | |||
* [[Media:Tek_308_logic_analyzer_+_probes_(1979)_SM.pdf|Tek 308 Service manual + probes]] (PDF, OCR, 19MB) | |||
}} | |||
The '''Tektronix P6406''' is a 16-channel word recognizer probe for the [[308]] logic analyzer. | The '''Tektronix P6406''' is a 16-channel word recognizer probe for the [[308]] logic analyzer. | ||
The | The P6406 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs. | ||
{{MissingSpecs}} | |||
==Internals== | ==Internals== | ||
Latest revision as of 04:22, 20 August 2021
The Tektronix P6406 is a 16-channel word recognizer probe for the 308 logic analyzer.
The P6406 uses the P64xx-family 10-wire input lead harnesses with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
Key Specifications
- please add
Internals
The 16 inputs connect (via 330 Ω resistors) to inputs of four 74LS266 quad exclusive-NOR gates that receive bit-inversion masks from two of three 74LS164 serial-in, parallel-out shift registers. The third shift register provides don't care masks (one per group of four inputs). After the logic circuits, a 74S140 cable driver sends the trigger signal to the 308.
Links
Pictures
-
P6406 probe
-
P6406 case close-up
-
P6406 PCB front
-
P6406 PCB back
-
Using P6406/P6451 probes with jumper wires
