105: Difference between revisions

Latest revision as of 06:45, 18 June 2024

Tektronix 105
25 Hz to 1 MHz square wave generator Produced from 1950 to (?) Manuals Tektronix 105 Manual Tektronix 105 Field Recalibration Procedure (OCR) Tektronix 105 Factory Calibration Procedure (OCR) (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 105 is a 25 Hz to 1 MHz square-wave generator. It was designed by Howard Vollum and Charles Sanford and has an all-tube construction.

The 105 has a d'Arsonval meter on its front panel indicating the current frequency. The frequency meter works on the principle of moving a constant amount of charge per cycle, integrating this charge into a current, and measuring the current.

The output is generated at the plates of three 6AG7 triodes that run in parallel.

Key Specifications

Frequency	25 Hz to 1 MHz
Rise and fall time	20 ns (10% to 90%)
Amplitude	10 V to 100 V_p-p (internal 600 Ω load); 1.5 V to 15 V_p-p (external 93 Ω load)
Power	250 W
Weight	35 pounds

Pictures

105 front
Early style of 105 with blocky meter
manual
powered on
internal view, tube side
right interior
output section detail
output waveform of 105
Block diagram
Power supply schematic
Generator schematic
Early Tek 105 with horizontal case
Early Tek 105 with power light below switches

Components

Some Parts Used in the 105

Part	Part Number(s)	Class	Description	Used in
6AG7	154-012 • 154-0012-00	Vacuum Tube (Pentode)	9 Watt power pentode	104 • 104A • 105 • 112 • 511 • 511A • 512 • 513 • 514 • 517 • 517A • 524
6CB6A	154-0030-00	Vacuum Tube (Pentode)	pentode	105 • 112 • 316 • 317 • 503 • 504 • 513 • 517 • 517A • 541 • 535 • 545 • 63 • 2A63

@@ Line 1: / Line 1: @@
-The Tektronix 105 is a square wave generator.
+{{Instrument Sidebar
-It is all tube.
+|manufacturer=Tektronix
-It was designed by Howard Vollum and Charles Sanford.
+|model=105
+|class=Signal generator
+|series=
+|summary=25 Hz to 1 MHz square wave generator
+|image=Tek_105_front.jpg
+|caption=
+|introduced=1950
+|discontinued=(?)
+|designers=Howard Vollum;Charles Sanford
+|manuals=
+* [[Media:070-049.pdf|Tektronix 105 Manual]]
+* [[Media:Tek type 105 field recal proc.pdf|Tektronix 105 Field Recalibration Procedure]] (OCR)
+* [[Media:Tek 105 fcp.pdf|Tektronix 105 Factory Calibration Procedure]] (OCR)
+}}
+The '''Tektronix 105''' is a 25 Hz to 1 MHz square-wave generator.
+It was designed by [[Howard Vollum]] and [[Charles Sanford]] and has an all-tube construction.
+The 105 has a d'Arsonval meter on its front panel indicating the current frequency.
+The frequency meter works on the principle of moving a constant amount of charge per cycle, integrating this charge into a current, and measuring the current.
+The output is generated at the plates of three [[6AG7]] triodes that run in parallel.
+{{BeginSpecs}}
+{{Spec|Frequency|25 Hz to 1 MHz}}
+{{Spec|Rise and fall time|20 ns (10% to 90%) }}
+{{Spec|Amplitude|10 V to 100 V<sub>p-p</sub> (internal 600 Ω load); 1.5 V to 15 V<sub>p-p</sub> (external 93 Ω load) }}
+{{Spec|Power|250 W}}
+{{Spec|Weight|35 pounds}}
+{{EndSpecs}}
+==Pictures==
+<gallery>
+Tek 105 front.jpg |105 front
+Tek 105 early.jpg|Early style of 105 with blocky meter
+Tek 105 on.jpg
+Tek 105 on2.jpg
+Tek 105 rear.jpg
+Tek 105 manual.jpg|manual
+Tek 105 on.jpg|powered on
+Tek 105 tube side.jpg|internal view, tube side
+-rightInterior.jpg| right interior
+Tek 105 output section.jpg|output section detail
+Tek 105 waveform.jpg|output waveform of 105
+Tek 105 blockdiag.png|Block diagram
+Tek 105 power supply.png|Power supply schematic
+Tek 105 generator and meter.png|Generator schematic
+Early tek 105.jpg|Early Tek 105 with horizontal case
+Tek 105 early power light low.jpg|Early Tek 105 with power light below switches
+</gallery>
+==Components==
+{{Parts|105}}
+[[Category:Pulse generators]]