PM101: Difference between revisions
Jump to navigation
Jump to search
(Created page with "The '''PM 101''' personality module is a general general purpose disassembly probe. It is meant to be used with the 7D02 logic analyzer plug-in. {{MissingSpecs}} {{Mis...") |
No edit summary |
||
| (18 intermediate revisions by 6 users not shown) | |||
| Line 1: | Line 1: | ||
The ''' | {{Plugin Sidebar | ||
|manufacturer=Tektronix | |||
|series=7D02 and DAS9100 | |||
|type=PM101 | |||
|summary=General purpose personality module | |||
|image=Tek_pm101_4.jpg | |||
|caption= | |||
|introduced=1981 | |||
|discontinued=(?) | |||
|designers= | |||
|manuals= | |||
* [[Media:070-2917-00.pdf|Tektronix PM101 Manual, Rev.1981]] (OCR) | |||
{{ROM Images}} | |||
* 160-0853-00 (2716, 2K) needed | |||
}} | |||
The '''PM101''' personality module is a general-purpose disassembly probe used with a [[7D02]] logic analyzer plug-in or a [[DAS9100]] logic analyzer. | |||
The PM101 buffers up to 16 data lines, 24 address lines, 10 control or qualifier lines, and a clock. | |||
{ | It also contains control circuitry which allows the logic analyzer to read the ROM or halt the system under test, and a self-test circuit. | ||
[[Category:Logic analyzer | See the [[Microprocessor support table]] for configuration details. | ||
==Specifications== | |||
{| class="wikitable" | |||
! Input voltage limits | |||
! Min | |||
! Max | |||
! Unit | |||
|- | |||
| Low | |||
| 0 | |||
| 0.5 | |||
| V | |||
|- | |||
| High | |||
| 2.4 | |||
| 7.0 | |||
| V | |||
|- | |||
! Input current limits | |||
! | |||
! | |||
! | |||
|- | |||
| Low (Vin = 0.4V) | |||
| | |||
| -0.2 | |||
| mA | |||
|- | |||
| High (Vin = 7.0V) | |||
| | |||
| 0.1 | |||
| mA | |||
|- | |||
| High (Vin = 2.7V | |||
| colspan="2" | +0.02 | |||
| mA | |||
|} | |||
*'''Clock''' | |||
** Input impedance: 50 kΩ // 15 | |||
** Maximum frequency: 10 MHz | |||
** Minimum pulse width: 25 ns | |||
*'''Miscellaneous''' | |||
** Size: 12 cm wide x 20.3 cm long x 4.7 cm high (4.7 x 8 x 1.7 In) | |||
** Weight: ≈1 kg (2 lbs) (with cables) | |||
==Photos== | |||
<gallery> | |||
Tek pm101 1.jpg | |||
Tek pm101 2.jpg | |||
Tek pm101 3.jpg | |||
Tek pm101 4.jpg | |||
Tek pm101 5.jpg |Pins of self test generator | |||
Tek pm101 drawing.jpg | |||
</gallery> | |||
[[Category:Logic analyzer personality modules]] | |||
[[Category:Manual needed]] | |||
Latest revision as of 01:14, 27 September 2024
The PM101 personality module is a general-purpose disassembly probe used with a 7D02 logic analyzer plug-in or a DAS9100 logic analyzer.
The PM101 buffers up to 16 data lines, 24 address lines, 10 control or qualifier lines, and a clock. It also contains control circuitry which allows the logic analyzer to read the ROM or halt the system under test, and a self-test circuit.
See the Microprocessor support table for configuration details.
Specifications
| Input voltage limits | Min | Max | Unit |
|---|---|---|---|
| Low | 0 | 0.5 | V |
| High | 2.4 | 7.0 | V |
| Input current limits | |||
| Low (Vin = 0.4V) | -0.2 | mA | |
| High (Vin = 7.0V) | 0.1 | mA | |
| High (Vin = 2.7V | +0.02 | mA | |
- Clock
- Input impedance: 50 kΩ // 15
- Maximum frequency: 10 MHz
- Minimum pulse width: 25 ns
- Miscellaneous
- Size: 12 cm wide x 20.3 cm long x 4.7 cm high (4.7 x 8 x 1.7 In)
- Weight: ≈1 kg (2 lbs) (with cables)
Photos
-
-
-
-
-
Pins of self test generator
-
