PM101: Difference between revisions

From TekWiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 11: Line 11:
|manuals=
|manuals=
* [[Media:070-2917-00.pdf|Tektronix PM101 Manual, Rev.1981]] (OCR)
* [[Media:070-2917-00.pdf|Tektronix PM101 Manual, Rev.1981]] (OCR)
{{ROM Images}}
* 160-0853-00 (2716, 2K) needed
}}
}}
The '''PM 101''' personality module is a general-purpose disassembly probe.  
The '''PM101''' personality module is a general-purpose disassembly probe used with a [[7D02]] logic analyzer plug-in or a [[DAS9100]] logic analyzer.


It is meant to be used with the [[7D02]] logic analyzer plug-in, and [[DAS9100]].  
The PM101 buffers up to 16 data lines, 24 address lines, 10 control or qualifier lines, and a clock.
It also contains control circuitry which allows the logic analyzer to read the ROM or halt the system under test, and a self-test circuit.


See the [[Microprocessor support table]] for configuration details.
See the [[Microprocessor support table]] for configuration details.
Line 55: Line 58:
|}
|}
*'''Clock'''
*'''Clock'''
** Input impedance: 50 kΩ nominal shunted by 15 pF nominal.
** Input impedance: 50 kΩ // 15 
**Maximum frequency: 10 MHz
** Maximum frequency: 10 MHz
**Minimum pulse width: 25 ns
** Minimum pulse width: 25 ns
*'''Miscellaneous'''
*'''Miscellaneous'''
**Size: 12 cm wide x 20.3 cm long x 4.7 cm high (4.7 x 8 x 1.7 In)
** Size: 12 cm wide x 20.3 cm long x 4.7 cm high (4.7 x 8 x 1.7 In)
**Weight: ≈ 1kg (2lbs) (with cables)
** Weight: ≈1 kg (2 lbs) (with cables)


==Photos==
==Photos==

Latest revision as of 02:14, 27 September 2024

Tektronix PM101
General purpose personality module

Compatible with 7D02 and DAS9100

Produced from 1981 to (?)

Manuals
ROM Images
File Pos. Checksum
  • 160-0853-00 (2716, 2K) needed
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The PM101 personality module is a general-purpose disassembly probe used with a 7D02 logic analyzer plug-in or a DAS9100 logic analyzer.

The PM101 buffers up to 16 data lines, 24 address lines, 10 control or qualifier lines, and a clock. It also contains control circuitry which allows the logic analyzer to read the ROM or halt the system under test, and a self-test circuit.

See the Microprocessor support table for configuration details.

Specifications

Input voltage limits Min Max Unit
Low 0 0.5 V
High 2.4 7.0 V
Input current limits
Low (Vin = 0.4V) -0.2 mA
High (Vin = 7.0V) 0.1 mA
High (Vin = 2.7V +0.02 mA
  • Clock
    • Input impedance: 50 kΩ // 15 
    • Maximum frequency: 10 MHz
    • Minimum pulse width: 25 ns
  • Miscellaneous
    • Size: 12 cm wide x 20.3 cm long x 4.7 cm high (4.7 x 8 x 1.7 In)
    • Weight: ≈1 kg (2 lbs) (with cables)

Photos