P6451

The Tektronix P6451 is an 8+1 channel active logic probe designed for use with the 7D01, 7D02, DL502, LA501A, WR501, 308, 318, and 338. It presents nine balanced signals back to the input section of the analyzer − 8 data channels, plus a 9^th channel that is used either as a clock or as a qualifier.

Channel equivalent circuit (click to enlarge)

The P6451 has the ability to set different threshold voltages for each of three channel groups − 1-4, 5-8, and the 9th (called 'C' in the manual).

The only active components are two 155-0137-00 custom hybrid pre-amp/comparator modules containing comparators with FET inputs and differential ECL outputs that can drive terminated 100 Ω lines. The instrument input would contain differential ECL receivers like the 10115 or 10216.

The P6451 uses the P64xx-family 10-wire input lead harnesses with 0.2"-spaced connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.

Part numbers for the P6451 are 010-6451-03 (straight connector) or 010-6451-05 (90° connector e.g. for 308).

Key Specifications

Maximum Voltage	±40 V nondestructive
Input impedance	1 MΩ // 5±1 pF (without input leads)
Delay time	17±2 ns with ±1 V input and threshold at 0 V
Power	5 V, 260 mA

Manuals

• P6451 Data Sheet (062-2372-00) (1976)
• P6451 Instructions (070-2515-00) (1980)

Links

• P6451 @ barrytech.com

Pictures

• 
• 
• 

  P6451 probe with 90° connector (for 308)

• 

  P6451 probe

• 

  P6451 probe internal, PCB front

• 

  P6451 probe internal, PCB back

• 

  Using P6451/P6406 probes with jumper wires