CG5011: Difference between revisions
Jump to navigation
Jump to search
(new in 1990 catalog) |
No edit summary |
||
| Line 2: | Line 2: | ||
class=signal generator | image=cg5011.jpg | introduced=1990 | discontinued=(?) | | class=signal generator | image=cg5011.jpg | introduced=1990 | discontinued=(?) | | ||
manuals= | manuals= | ||
* [ | * [https://w140.com/Tektronix_CG5010_CG5011_instruction_manual_p1_600dpi.pdf Tektronix CG5010 and CG5011 Instruction Manual p1 (PDF)] | ||
* [ | * [https://w140.com/Tektronix_CG5010_CG5011_service_manual_p2_600dpi.pdf Tektronix CG5010 and CG5011 Instruction Manual p2 (PDF)] | ||
}} | }} | ||
Revision as of 12:52, 23 January 2021
The Tektronix CG5011 is a programmable calibration generator plug-in for the TM5000 system.
It is a source of calibrated timing signals, calibrated amplitude voltage and current waveforms, and pulses with low distortion edges, used to calibrate a wide range of oscilloscope parameters, either manually or as part of a GPIB controlled system.
The CG5011 occupies three slots in a TM5006 mainframe. It comes with a 015-0611-00 Programmable Pulse Head (required for operation) and a 015-0310-01 Comparator Head. The cable set p/n is 012-0884-00.
An optional 015-0309-01 variable remote control attaches through a LEMO S-series connector.
Key Specifications
- please add
Test modes:
- Vertical Gain
- Horizontal Timing and Gain
- Vertical Bandwidth/Pulse Response Characteristics
- Probe Accuracy and Compensation
- Current-Probe Accuracy
- Calibrator-Output Accuracy
Option 01 adds a temperature compensated, 5 MHz crystal oscillator for a high accuracy time base.
