5000 Series plug-in interface: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m (Tidied formatting. I removed some sketchy bits - I hope those weren't there to fix something obscure.) |
||
Line 5: | Line 5: | ||
Looking into the mainframe from the front panel, "A" pins are left of the connector centerline and "B" are on the right. Pins are numbered from 1 at the bottom to 28 on the top. | Looking into the mainframe from the front panel, "A" pins are left of the connector centerline and "B" are on the right. Pins are numbered from 1 at the bottom to 28 on the top. | ||
{| class="wikitable" | {| class="wikitable" | ||
|+ Description of signals | |||
|- | |- | ||
!width="10%"| | !width="10%"| Pin | ||
!width="45%"| A side | !width="45%"| A side<br>Function | ||
!width="45%"| B side | !width="45%"| B side<br>Function | ||
|- | |- | ||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
! 1 | |||
| +200 V || +38 V unreg | |||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
! 2 | |||
| Utility GND || +5 V | |||
|- | |- | ||
! 3 | |||
| || Line trigger | |||
|- bgcolor="Black" | |- bgcolor="Black" | ||
| | | || || | ||
|- | |- | ||
! 4 | |||
| Trig out (H) / Right trig in (V) || Left trig in (V) | |||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
! 5 | |||
| +30 V || −30 V | |||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
! 6 | |||
| +15 V ''[54xx only!]'' || −15 V ''[54xx only!]'' | |||
|- bgcolor="Yellow" | |- bgcolor="Yellow" | ||
! 7 | |||
| +plugin signal || −plugin signal | |||
|- | |- | ||
! 8 | |||
| || | |||
|- | |- | ||
! 9 | |||
| Z Axis A Sweep || Intensify | |||
|- | |- | ||
! 10 | |||
| A gate || Z Axis B Sweep | |||
|- | |- | ||
! 11 | |||
| Sample pulse ''[note 1]'' || Load stop ''[note 1]'' | |||
|- | |- | ||
! 12 | |||
| Single-sweep mode || | |||
|- bgcolor="Yellow" | |- bgcolor="Yellow" | ||
! 13 | |||
| +plugin signal || −plugin signal | |||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
! 14 | |||
| Clean GND Return || Clean GND Return | |||
|- | |- | ||
! 15 | |||
| A sweep || ALT drive | |||
|- | |- | ||
! 16 | |||
| Lockout B sweep || Trace separation | |||
|- | |- | ||
! 17 | |||
| Lockout A sweep || Single sweep reset | |||
|- | |- | ||
! 18 | |||
| Chop sense || Display on | |||
|- | |- | ||
! 19 | |||
| 100 μs/div detect || Display chop | |||
|- | |- | ||
! 20 | |||
| Chop activate || | |||
|- | |- | ||
! 21 | |||
| bgcolor="Pink" | −30 V || | |||
|- bgcolor="LightGreen" | |- bgcolor="LightGreen" | ||
! 22 | |||
| TS7 || TS10 | |||
|- bgcolor="LightGreen" | |- bgcolor="LightGreen" | ||
! 23 | |||
| TS5 || TS6 | |||
|- bgcolor="LightGreen" | |||
! 24 | |||
| Ch. 2 Col || Ch. 2 Row / Sweep rate | |||
|- bgcolor="LightGreen" | |- bgcolor="LightGreen" | ||
| | ! 25 | ||
| TS3 || TS2 | |||
|- bgcolor="LightGreen" | |- bgcolor="LightGreen" | ||
| | ! 26 | ||
| TS8 || TS9 | |||
|- bgcolor="LightGreen" | |- bgcolor="LightGreen" | ||
! 27 | |||
| TS1 || TS4 | |||
|- bgcolor="LightGreen" | |- bgcolor="LightGreen" | ||
! 28 | |||
| Ch. 1 Col || Ch. 1 Row | |||
|} | |} | ||
Line 83: | Line 107: | ||
:{| cellpadding="4" | :{| cellpadding="4" | ||
|- | |- | ||
| bgcolor="Pink" | Plugin power & ground | | bgcolor="Pink" | Plugin power & ground | ||
|- | |- | ||
| bgcolor="Yellow" | HF signals | | bgcolor="Yellow" | HF signals | ||
|- | |- | ||
| bgcolor="LightGreen" | [[7000 series readout system|Readout system]] signals (5400 series only) | | bgcolor="LightGreen" | [[7000 series readout system|Readout system]] signals (5400 series only) | ||
|} | |} | ||
[[Category:Plug-in interfaces]] | [[Category:Plug-in interfaces]] |
Revision as of 06:30, 9 July 2023
Tektronix 5000 series oscilloscope mainframes have two vertical plug-in slots, and one horizontal plug-in slots.
The interconnect on either slot type is a 56-pin PCB edge connector.
Looking into the mainframe from the front panel, "A" pins are left of the connector centerline and "B" are on the right. Pins are numbered from 1 at the bottom to 28 on the top.
Pin | A side Function |
B side Function |
---|---|---|
1 | +200 V | +38 V unreg |
2 | Utility GND | +5 V |
3 | Line trigger | |
4 | Trig out (H) / Right trig in (V) | Left trig in (V) |
5 | +30 V | −30 V |
6 | +15 V [54xx only!] | −15 V [54xx only!] |
7 | +plugin signal | −plugin signal |
8 | ||
9 | Z Axis A Sweep | Intensify |
10 | A gate | Z Axis B Sweep |
11 | Sample pulse [note 1] | Load stop [note 1] |
12 | Single-sweep mode | |
13 | +plugin signal | −plugin signal |
14 | Clean GND Return | Clean GND Return |
15 | A sweep | ALT drive |
16 | Lockout B sweep | Trace separation |
17 | Lockout A sweep | Single sweep reset |
18 | Chop sense | Display on |
19 | 100 μs/div detect | Display chop |
20 | Chop activate | |
21 | −30 V | |
22 | TS7 | TS10 |
23 | TS5 | TS6 |
24 | Ch. 2 Col | Ch. 2 Row / Sweep rate |
25 | TS3 | TS2 |
26 | TS8 | TS9 |
27 | TS1 | TS4 |
28 | Ch. 1 Col | Ch. 1 Row |
Notes
Pin group function legend
Plugin power & ground HF signals Readout system signals (5400 series only)