564: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(Added additional specs from the manual, some values I'm not confident on.)
No edit summary
Line 20: Line 20:
}}
}}
The '''Tektronix 564''' is the [[CRT_storage_scope|storage scope]]  
The '''Tektronix 564''' is the [[CRT_storage_scope|storage scope]]  
of the [[560-series scopes|560 series]].
of the [[560-series scopes|560 series]], [[introduced in 1962|introduced in June 1962]].  
It was [[introduced in 1962|introduced in June 1962]].  
It takes two [[560-series plug-ins|2- or 3-series plug-ins]].
The RM564 is the rack-mount version. 


The 564 is a bench scope. The RM564 is the rack-mount version.  It is designed for usage of 2 and [[3-series plugins]]
The 564 is a tube-based oscilloscope, whereas a later version, the '''564B''' (1969), is fully solid state.
The 564 is a tube-based oscilloscope, whereas a later version, the '''564B''' (1969), is fully solid state.
Mod 121N added auto-erase. The screen has split storage in two 4cm x 10cm sections allowing independent upper and lower saving and erasing.
Mod 121N added auto-erase. The screen has split storage in two 4 cm × 10 cm sections allowing independent upper and lower saving and erasing.


The 564 was one of the mainframes offered for the [[Engine Analyzer]] package.
The 564 was one of the mainframes offered for the [[Engine Analyzer]] package.


{{BeginSpecs}}
{{Spec | Bandwidth | 25 MHz? with appropriate plugins }}
{{Spec | Rise time | 5 μs? }}
{{Spec | Storage modes | bistable, upper, lower }}
{{Spec | Writing speed | 25 Div/ms Minimum with T5640-200 | 10 Div/ms minimum with T5640-201 }}
{{Spec | Storage time | At least 1 hour }}
{{Spec | CRT | 8×10 Div @ 1 cm/Div with external graticule; tube [[154-0565-00]] (T5641-200, standard) / [[154-0565-01]] (fast writing speed) }}
{{Spec | Acceleration voltage | 3.5 kV }}
{{Spec | Calibrator | 0.2 mV to 100 V<sub>p-p</sub> in 18 steps, square wave at line frequency}}
{{Spec | Power | 105−125 V or 210−250 V, 50 to 400 Hz, 250 W maximum; Convection cooling, thermal cut-off switch }}
{{Spec | Weight | ~14 kg (30.5 lb) without plugins}}
{{EndSpecs}}
Steve Ditter says:
Steve Ditter says:
<blockquote>
<blockquote>
Line 37: Line 49:
expense of about 30% shorter useful life.
expense of about 30% shorter useful life.
</blockquote>
</blockquote>
CRTs in the 564B were [[154-0565-00]] (T5641-200) and [[154-0565-01]] (fast writing speed), respectively.
The left plug-in directly drives the vertical deflection plates of the CRT. 
The right plug-in directly drives the horizontal deflection plates. 
{{BeginSpecs}}
{{Spec | Bandwidth | 25 MHz? with appropriate plugins }}
{{Spec | Rise time | 5 μs? }}
{{Spec | Storage modes | bistable, upper, lower }}
{{Spec | Writing speed | 25 Div/ms Minimum with T5640-200 | 100 Div/ms minimum with T5640-201 }}
{{Spec | Storage time | At least 1 hour }}
{{Spec | CRT | 8×10 Div @ 1 cm/Div with external Graticule}}
{{Spec | Acceleration voltage | 3.5 kV }}
{{Spec | Calibrator | 0.2 mV to 100V peak-to-peak in 18 steps, Square wave at line frequency}}
{{Spec | Power | 105-125 V or 210-250 V, 50 to 400hz, 250 W maximum; Convection cooling, thermal cut-off switch }}
{{Spec | Weight | ~14 kg (30.5 lb)  without plugins}}
{{EndSpecs}}
==Links==
==Links==
* Tek [http://www.barrytech.com/tektronix/vintage/tek564.html 564] / [http://www.barrytech.com/tektronix/vintage/tekrm564.html RM564] @ barrytech.com
* Tek [http://www.barrytech.com/tektronix/vintage/tek564.html 564] / [http://www.barrytech.com/tektronix/vintage/tekrm564.html RM564] @ barrytech.com
Line 62: Line 54:
* [http://users.monash.edu.au/~ralphk/scope564.html Ralph K's 564 pictures page]
* [http://users.monash.edu.au/~ralphk/scope564.html Ralph K's 564 pictures page]
* A [https://www.youtube.com/watch?v=QkcVwRKy6Jk 564 @ YouTube] / [https://www.youtube.com/watch?v=1DtQk8Tj7Ls another one]
* A [https://www.youtube.com/watch?v=QkcVwRKy6Jk 564 @ YouTube] / [https://www.youtube.com/watch?v=1DtQk8Tj7Ls another one]
==Internals==
As in all 560 series scopes, the left plug-in directly drives the vertical deflection plates of the CRT, and the right plug-in directly drives the horizontal deflection plates. 


==Pictures==
==Pictures==

Revision as of 03:36, 5 February 2021

Manuals – Specifications – Links – Pictures

The Tektronix 564 is the storage scope of the 560 series, introduced in June 1962. It takes two 2- or 3-series plug-ins. The RM564 is the rack-mount version.

The 564 is a tube-based oscilloscope, whereas a later version, the 564B (1969), is fully solid state. Mod 121N added auto-erase. The screen has split storage in two 4 cm × 10 cm sections allowing independent upper and lower saving and erasing.

The 564 was one of the mainframes offered for the Engine Analyzer package.

Key Specifications

Bandwidth 25 MHz? with appropriate plugins
Rise time 5 μs?
Storage modes bistable, upper, lower
Writing speed 25 Div/ms Minimum with T5640-200
Storage time At least 1 hour
CRT 8×10 Div @ 1 cm/Div with external graticule; tube 154-0565-00 (T5641-200, standard) / 154-0565-01 (fast writing speed)
Acceleration voltage 3.5 kV
Calibrator 0.2 mV to 100 Vp-p in 18 steps, square wave at line frequency
Power 105−125 V or 210−250 V, 50 to 400 Hz, 250 W maximum; Convection cooling, thermal cut-off switch
Weight ~14 kg (30.5 lb) without plugins

Steve Ditter says:

Tek offered two phosphors for the 564. You can determine which one you have by reading the CRT part number, visible in the window in the shield where the deflection plate connections are. 154-0410-00 is P200, which was the standard tube. The 154-0418-00 is the P201, which has faster writing rate, but at the expense of about 30% shorter useful life.

Links

Internals

As in all 560 series scopes, the left plug-in directly drives the vertical deflection plates of the CRT, and the right plug-in directly drives the horizontal deflection plates.

Pictures

564

RM564

564B

Schematics

Versions

Internals

Third-party