155-0011-00: Difference between revisions
Jump to navigation
Jump to search
(4851,4852 in RPR = 485-1,485-2) |
No edit summary |
||
| Line 5: | Line 5: | ||
|Part_nos=155-0011-00 | |Part_nos=155-0011-00 | ||
|Description=clock and chop blanking | |Description=clock and chop blanking | ||
|Used_in=485 | |Used_in=485;7313;7403N;R7403N;7503;7504;7514;7603;AN/USM-281C;7613;7623;7623A;7633;7704;R7704;7704A;7834;7844;7854;7904;7904A;R7903;R7912;7912AD;7912HB;7934;7104;R7103;AN | ||
|Designers=Les Larson | |Designers=Les Larson | ||
}} in a 16-pin DIP, designed by [[Les Larson]]. | }} in a 16-pin DIP, designed by [[Les Larson]]. | ||
Revision as of 01:47, 22 November 2021
The Tektronix M012 (P/N 155-0011-00) is a clock and chop blanking monolithic integrated circuit in a 16-pin DIP, designed by Les Larson.
It generates the 2 MHz chop clock signal for triggering the chop counter (155-0010-00 aka M004) as well as the chop blanking waveform. The blanking waveform can be delayed in time and varied in width over a certain range to accommodate different delay lines. It also has five logical inputs which are the plug-in and mainframe modes that are used to decide if chop blanking should be used at a certain time.
Used in
- 485
- 7313
- 7403N
- 7503 (U55), 7504, 7514
- 7603 (U55), AN/USM-281C
- 7613, 7623, 7633 (U55)
- 7704, 7704A
- 7834, 7844 (U205), 7854 (A14U12)
- 7904 (U215), 7904A, R7903
- R7912, 7912AD, 7912HB
- 7934
- 7104