3S6: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 18: | Line 18: | ||
It interfaces with the sampling heads through a connector on its rear panel (using [[S-series sampling head extenders]]). | It interfaces with the sampling heads through a connector on its rear panel (using [[S-series sampling head extenders]]). | ||
It is programmable, allowing settings such as mV/cm to be controlled by an external programming unit, e.g. a [[ | It is programmable, allowing settings such as mV/cm to be controlled by an external programming unit, e.g. a [[240|Type 240]]. | ||
In a typical setup, the programming unit is connected to the 568 using a multi-conductor cable. | In a typical setup, the programming unit is connected to the 568 using a multi-conductor cable. | ||
Revision as of 07:00, 11 June 2023
The Tektronix 3S6 is a dual-trace sampling module for 560-series scopes, particularly the 568.
It interfaces with the sampling heads through a connector on its rear panel (using S-series sampling head extenders). It is programmable, allowing settings such as mV/cm to be controlled by an external programming unit, e.g. a Type 240.
In a typical setup, the programming unit is connected to the 568 using a multi-conductor cable. The 568 routes those signals to the plug-ins.
Key Specifications
- please add
Links
Pictures
-
Front
-
Left
-
Right
-
Connector to PCB
