Nuvistor: Difference between revisions
No edit summary |
No edit summary |
||
| Line 30: | Line 30: | ||
* [http://www.r-type.org/articles/art-150.htm Detailed article on Nuvistors] | * [http://www.r-type.org/articles/art-150.htm Detailed article on Nuvistors] | ||
<gallery> | |||
Assorted nuvistors.jpg | |||
</gallery> | |||
[[Category:Vacuum tubes]] | [[Category:Vacuum tubes]] | ||
[[Category:Repair issues]] | [[Category:Repair issues]] | ||
Revision as of 11:08, 16 October 2016
Nuvistors are miniature, rugged, metal-ceramic enclosed vacuum tubes. There are used in many Tektronix products of the 1960's. Nuvistors used in Tek gear include:
- 6CW4 (in 1A7)
- 7586 (in 1A1, 1A2, 1A5, 11B1, M, 321, 3A74, 6R1A, 3A1, 3A3, 4S1, and 3S76)
- 7587 (in 184)
- 7895 (in 3B1, 3B3)
- 8056 (in 10A1, 422)
- 8393 (in 453 and 1A7)
As high-impedance buffers (cathode follower), Nuvistors were replaced by JFETs. As voltage amplifiers, they were mostly replaced by BJTs. Some products such as the 1A1 and 453 started production with Nuvistors and then later switched to transistors.
Nuvistors, like all tubes, eventually need to be replaced. They are no longer manufactured but they are still available online from old stock.
Another repair option is to convert the circuit to use a transistor. In at least one case (the 422), JFETs can be plugged directly into the Nuvistor sockets with no further circuit modification, and proper function of the scope is restored.
