P6451: Difference between revisions

P6451 (view source)

347 bytes removed , 18 September 2017

no edit summary

36,628

edits

@@ Line 8: / Line 8: @@
 The only active components are two [[155-0137-00]] custom hybrid pre-amp/comparator modules containing comparators with FET inputs and differential ECL outputs that can drive terminated 100 Ω lines. The instrument input would contain differential ECL receivers like the 10115 or 10216.
-Input lead sets (same as for the [[P6406]]):
+The P6451 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors.  Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
-* [[012-0747-00]] - standard 10-wire 10 in/25 cm with pluggable probe tips
-* 012-0989-00 - 10-wire 5 in/12 cm with pluggable probe tips
-* 012-0655-01 - ten individual 40 cm leads
-* 012-0655-02 - ten individual 8 cm leads
-* 012-0670-00 - ten individual 16 cm leads
-* 012-0800-00 - 10-wire 10 cm
-The probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch so it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
 Part numbers for the P6451 are 010-6451-03 (straight connector) or 010-6451-05 (90° connector e.g. for [[308]]).