155-0011-00: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
The '''155-0011-00''' is a Tek-made Clock and Chop Blanking chip in a 16-pin DIP.
The '''Tektronix 155-0011-00''' (M012) is a Tek-made clock and chop blanking chip in a 16-pin DIP, designed by [[Les Larson]].
 
It generates the 2 MHz chop clock signal for triggering the chop counter ([[155-0010-00]] aka M004) as well as the chop blanking
waveform. The blanking waveform can be delayed in time and varied in width over a certain range to accommodate different delay lines.
It also has fine logical inputs which are the plug-in and mainframe modes that are used to decide if chop blanking should be used at a certain time.


==Used in==
==Used in==
* [[485]]
* [[4851]], [[4852]]
* [[7313]]
* [[7313]]
* [[7403N]]
* [[7403N]]
* [[7504]], [[7514]]
* [[7603]] (U55)
* [[7603]] (U55)
* [[7613]], [[7623]], [[7633]] (U55)
* [[7613]], [[7623]], [[7633]] (U55)
Line 18: Line 25:
* [[Media:Tek 155-0011-00.pdf|Tektronix 155-0011-00 Datasheet (PDF)]]
* [[Media:Tek 155-0011-00.pdf|Tektronix 155-0011-00 Datasheet (PDF)]]


[[Category:Tektronix-made integrated circuits]]
[[Category:Tektronix-made monolithic integrated circuits]]

Revision as of 00:40, 26 July 2018

The Tektronix 155-0011-00 (M012) is a Tek-made clock and chop blanking chip in a 16-pin DIP, designed by Les Larson.

It generates the 2 MHz chop clock signal for triggering the chop counter (155-0010-00 aka M004) as well as the chop blanking waveform. The blanking waveform can be delayed in time and varied in width over a certain range to accommodate different delay lines. It also has fine logical inputs which are the plug-in and mainframe modes that are used to decide if chop blanking should be used at a certain time.

Used in

Datasheet