81: Difference between revisions
No edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
* [http://w140.com/tek-81a.pdf Tektronix Type 81A Manual (PDF)] | * [http://w140.com/tek-81a.pdf Tektronix Type 81A Manual (PDF)] | ||
* [http://w140.com/tek_fcp/tek_type_81_factory_cal_proc.pdf Tektronix Type 81 Factory Calibration Procedure (PDF)] | * [http://w140.com/tek_fcp/tek_type_81_factory_cal_proc.pdf Tektronix Type 81 Factory Calibration Procedure (PDF)] | ||
* [[Media:Tek 81a fcp may 1967.pdf]] | |||
}} | }} | ||
The '''Tektronix Type 81''' is a plug-in adapter so that [[letter-series and 1-series plug-ins]] can be used in [[580-series scopes]]. | The '''Tektronix Type 81''' is a plug-in adapter so that [[letter-series and 1-series plug-ins]] can be used in [[580-series scopes]]. | ||
Revision as of 05:45, 5 June 2019
Template:Plugin Sidebar 2 The Tektronix Type 81 is a plug-in adapter so that letter-series and 1-series plug-ins can be used in 580-series scopes.
The 81 and 81A are significantly different. Type 81 is tube-based and has a bandwidth of 33 MHz. Type 81A is solid-state and has a bandwidth of 50 MHz.
Specifications
please add
Internals
The Type 81 contains a two-stage amplifier. The letter-series plug-in drives the input stage of the Type 81 which is high impedance (grids of a 6GM8 stage with T-coil peaking) so that the plug-in sees conditions similar to the input of a 530-, 540-, or 550-series scope. The second stage is a 6DJ8 cathode-follower, which drives the 580-series scope's 93 Ω input impedance.
Type 81A has a FET source follower pair followed by cascoded BJT amplifiers.
Pictures
Type 81
-
-
-
Type 81 Schematic
-
Type 81
-
Type 81
-
Type 81
-
Type 81
-
Type 81
-
Type 81
-
Type 81
-
Type 81
Type 81A
-
Type 81A
-
Type 81A
-
Type 81A
-
Type 81A
-
Type 81A
-
Type 81A
-
Type 81A
-
Type 81A Schematic
