155-0011-00: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
m (→‎top: clean up)
Line 1: Line 1:
The '''Tektronix 155-0011-00''' (M012) is a Tek-made clock and chop blanking chip in a 16-pin DIP, designed by [[Les Larson]].
{{Monolithic IC
|Manufacturer=Tektronix
|Model=M012
|Part_nos=155-0011-00
|Description=clock and chop blanking  
|Used_in=485;4851;4852;7313;7403N;7504;7514;7603;7613;7623;7633;7704;7704A;7834;7844;7854;7904;7904A;7912AD;7912HB;7934;7104
|Designers=Les Larson
}} in a 16-pin DIP, designed by [[Les Larson]].


It generates the 2 MHz chop clock signal for triggering the chop counter ([[155-0010-00]] aka M004) as well as the chop blanking
It generates the 2 MHz chop clock signal for triggering the chop counter ([[155-0010-00]] aka M004) as well as the chop blanking waveform.  
waveform. The blanking waveform can be delayed in time and varied in width over a certain range to accommodate different delay lines.
The blanking waveform can be delayed in time and varied in width over a certain range to accommodate different delay lines.
It also has fine logical inputs which are the plug-in and mainframe modes that are used to decide if chop blanking should be used at a certain time.
It also has fine logical inputs which are the plug-in and mainframe modes that are used to decide if chop blanking should be used at a certain time.



Revision as of 01:40, 16 August 2021

The Tektronix M012  (P/N 155-0011-00) is a clock and chop blanking monolithic integrated circuit in a 16-pin DIP, designed by Les Larson.

It generates the 2 MHz chop clock signal for triggering the chop counter (155-0010-00 aka M004) as well as the chop blanking waveform. The blanking waveform can be delayed in time and varied in width over a certain range to accommodate different delay lines. It also has fine logical inputs which are the plug-in and mainframe modes that are used to decide if chop blanking should be used at a certain time.

Used in

Datasheet