GR-874 connector: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 23: Line 23:
* [http://www.mgs4u.com/RF-Microwave/General-Radio-GR-874.htm MGS sales list of GR874 hardware]
* [http://www.mgs4u.com/RF-Microwave/General-Radio-GR-874.htm MGS sales list of GR874 hardware]
* [[017-051]]/[[017-052]]/[[017-053]]/[[017-055]] adapters
* [[017-051]]/[[017-052]]/[[017-053]]/[[017-055]] adapters
* [https://www.youtube.com/watch?v=GfPKYc4XLho GR-874 Connector] @ YouTube
{{Documents|Link=GR-874 connector}}
{{Documents|Link=GR-874 connector}}



Revision as of 02:47, 16 March 2024

General Radio 874 (GR-874) connectors are hermaphroditic (asexual) coaxial RF connectors developed by Eduard Karplus at General Radio in the late 1940s, initially for applications up to "4500 Mc" (4.5 GHz).

They first appeared in the General Radio Catalog L of 1948.

GR-874 connectors are carefully engineered to keep a constant impedance throughout the signal path, by varying connector diameters between free-air and dielectrically supported sections. These connectors therefore exhibit very little reflection and are well suited for frequencies up to 9 GHz and pulse applications. For higher frequencies a smaller connector is required to avoid the excitation of wave guide modes.

Most GR-874 connectors came in 50 Ω impedance. Versions for 75 Ω and 125 Ω were also available using the same ground shield and housing, but different (thinner) center pin geometry. The Tektronix 519 uses the 125 Ω GR-874 variant.

The regular 50 Ω version is used in the 1S1, 1S2, 3S1, 3S7, 3S76, 3T7, 4S1, 4S2, 5T1, 5T1A, 5T3, 7M11, N, S-1, S-2, 106, 109, 110, 113, 191, 261, 280, 281, 282, R293, 661, P6025, P6032, P6051, 017-0086-00, 017-0088-00, 035-5031-00, 067-506, 067-0511-00, 067-0513-00, 067-0578-99, 067-0594-00, 067-0832-01, and possibly others, as well as in many adaptors, attenuators, and terminators.

Different versions of the connector have different maximum voltage ratings; 1000 V is typical. There are locking and non-locking versions.

By the 1970s, GR-874 connectors were being supplanted by SMA connectors in test equipment, see e.g. the progression from the S-1 to the S-4 sampling heads, also motivated by the higher bandwidth requirements.

GR-874 connectors and adapters continue to be available through IET Labs, Max-Gain Systems, Pasternack and possibly others.

Links

Documents Referencing GR-874 connector

Document Class Title Authors Year Links
GenRad Experimenter Oct 1948.pdf Article A Radically New Coaxial Connector for the Laboratory 1948
GenRad Experimenter Oct 1961.pdf Article New and Improved Coaxial Connectors 1961

Pictures