3S6
The Tektronix 3S6 is a dual-trace sampling module for 560-series_scopes, particularly the 568.
It interfaces with the sampling heads through a connector on its rear panel (using S-series sampling head extenders). It is programmable, allowing settings such as mV/cm to be controlled by an external programming unit such as the Tektronix Type 240.
In a typical setup, the programming unit is connected to the 568 using amulti-conductor cable. The 568 routes those signals to the plug-ins.
Specifications
please add
Links
Pictures
-
Front
-
Left
-
Right
-
Connector to PCB
