P6451

Tektronix P6451
8+1-channel logic analyzer probe Tektronix P6451 Probe Compatible with 7D01, 7D02, DL502, LA501A, WR501, 308, 318, 338 Produced from 1977 to (?) Manuals P6451 Data Sheet (062-2372-00) (1976) P6451 Instructions (070-2515-00) (1980)

Manuals – Specifications – Links – Pictures

The Tektronix P6451 is an 8+1 channel active logic probe designed for use with the 7D01, 7D02 Opt.01, DL502, LA501A, WR501, 308, 318, 338, and 8550. It presents nine differential ECL signals back to the input section of the analyzer − 8 data channels, plus a 9^th channel that is used either as a clock or as a qualifier.

Channel equivalent circuit (click to enlarge)

The P6451 has the ability to set different threshold voltages for each of three channel groups − 1-4, 5-8, and the 9th (called 'C' in the manual).

The only active components are two 155-0137-00 custom hybrid pre-amp/comparator modules containing comparators with FET inputs and differential ECL outputs that can drive terminated 100 Ω lines. The instrument input would contain differential ECL receivers like the 10115 or 10216.

The P6451 uses the P64xx-family 10-wire input lead harnesses with 0.2"-spaced connectors. It is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.

There are two versions of the P6451:

Part No. 010-6451-02/-03 has a straight connector, and is intended for 7000-series and TM500 plug-ins (e.g.7D02, SA501) and 8550 series development systems.
Part No. 010-6451-05/-07 has a 90° connector and is intended for 300 series analyzers (e.g. 308). The -07 also has additional series resistance in the inputs for damping ringing caused by a lead set.

P6458 is a 4-channel version for the SA501, which works with either model.

Key Specifications

Maximum Voltage	±40 V nondestructive
Input impedance	1 MΩ // 5±1 pF (without input leads)
Delay time	17±2 ns with ±1 V input and threshold at 0 V
Power	5 V, 260 mA