105
The Tektronix 105 is a 25 Hz to 1 MHz square wave generator. It was designed by Howard Vollum and Charles Sanford. It is all tube.
The 105 has a d'Arsonval meter on its front panel indicating the current frequency. The frequency meter works on the principle of moving a constant amount of charge per cycle, integrating this charge into a current, and measuring the current.
The output is generated at the plates of three 6AG7 triodes that run in parallel.
Specifications
- Frequency range: 25 Hz to 1 MHz
- Rise and fall time (10% to 90%): 20 nanoseconds
- Amplitude range (600-ohm internal load only): 10 V to 100 V peak-to-peak
- Amplitude range (93-ohm external load): 1.5 V to 15 V peak-to-peak
- Power consumption: 250 watts
- Weight: 35 pounds
Pictures
-
105 front
-
Early style of 105 with blocky meter
-
-
-
-
manual
-
powered on
-
internal view, tube side
-
right interior
-
output section detail
-
output waveform of 105
-
Block diagram
-
Power supply schematic
-
Generator schematic
-
Early Tek 105 with horizontal case
Some Parts Used in the 105
| Part | Part Number(s) | Class | Description | Used in |
|---|---|---|---|---|
| 6AG7 | 154-012 • 154-0012-00 | Vacuum Tube (Pentode) | 9 Watt power pentode | 104 • 104A • 105 • 112 • 511 • 511A • 512 • 513 • 514 • 517 • 517A • 524 |
| 6CB6A | 154-0030-00 | Vacuum Tube (Pentode) | pentode | 105 • 112 • 316 • 317 • 503 • 504 • 513 • 517 • 517A • 541 • 535 • 545 • 63 • 2A63 |