3T4
The Tektronix 3T4 is a sampling sweep plug-in for 560-series scopes that is remotely programmable, allowing computer-controlled measurements of high-speed repetitive waveforms. It interfaces with a 6R1A plug-in in a Type 567 scope. It was introduced in 1965.
The 283 real-time adapter enables real-time sweeps with a 3T4.
Key Specifications
- please add
The equivalent-time sweep rate ranges from 1 ns/div to 200 μs/div. There is a 10x calibrated horizontal magnification mode that can be selected, providing 100 ps/div horizontal scale. maximum trigger frequency is 1 GHz.
The sweep can be controlled by the staircase ramp generator in the 3T4, manually by a front-panel knob, or remotely by a control voltage sent to the 3T4.
The remotely programmable functions are
- Equivalent-time sweep rate
- Delay time
- Samples per sweep
- Normal or single-display mode
- Single-display start
Links
- See also 012-0101-00
Documents Referencing 3T4
- (no results)
Pictures
-
Front View
-
Left View
-
Right View
-
Top View
-
Bottom View
-
Description in 1965
Tektronix Catalog -
In April 1965 SMPTE Journal
Components
Some Parts Used in the 3T4
| Part | Part Number(s) | Class | Description | Used in |
|---|---|---|---|---|
| 8056 | 154-0417-00 | Vacuum Tube (Triode) | low-voltage Nuvistor triode | 422 • 502 • W • 1S1 • 3A7 • 3S3 • 3T4 • 5T3 • 10A1 |