105

The Tektronix 105 is a 25 Hz to 1 MHz square-wave generator. It was designed by Howard Vollum and Charles Sanford and has an all-tube construction.

Manuals – Specifications – Links – Pictures

The 105 has a d'Arsonval meter on its front panel indicating the current frequency. The frequency meter works on the principle of moving a constant amount of charge per cycle, integrating this charge into a current, and measuring the current.

The output is generated at the plates of three 6AG7 triodes that run in parallel.

Key Specifications

Frequency range	25 Hz to 1 MHz
Rise and fall time	20 ns (10% to 90%)
Amplitude	10 V to 100 Vp-p (internal 600 Ω load); 1.5 V to 15 Vp-p (external 93 Ω load)
Power	250 W
Weight	35 pounds

Pictures

• 

  105 front

• 

  Early style of 105 with blocky meter

• 
• 
• 
• 

  manual

• 

  powered on

• 

  internal view, tube side

• 

  right interior

• 

  output section detail

• 

  output waveform of 105

• 

  Block diagram

• 

  Power supply schematic

• 

  Generator schematic

• 

  Early Tek 105 with horizontal case

• 

  Early Tek 105 with power light below switches

Components