3T6

Template:Plugin Sidebar 2 The Tektronix Type 3T6 is a sampling plug-in for 560-series scopes. It is particularly suited, and programmable, when used in a 568.

In addition to the usual two 560-series connectors on the rear of the plug-in, the 3T6 has two extra connectors, J24 and P23. J24 is used for programming the 3T6. P23 is a coaxial feed (via a Gremar connector) of the trigger input signal. Both of these connectors mate with corresponding connectors in the 568.

The 3T6 contains a digital delay that controls the time between when the trigger event is recognized and when the sweep ramp is started. The purpose of this delay is the same as any delayed sweep: to zoom in on a region of a waveform that is not immediately after the trigger event. The digital delay in the 3T6 can be controlled by digital rotary switches on the front panel of the 3T6 or remotely, through the 568, via connector J24.

Specifications

please add

Pictures

• 

  front view

• 

  right view

• 

  top view

• 

  bottom view

• 

  rear view