155-0011-00

From TekWiki
Revision as of 02:49, 22 November 2021 by Peter (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
155-0011-00

The Tektronix M012  (P/N 155-0011-00) is a clock and chop blanking monolithic integrated circuit in a 16-pin DIP, designed by Les Larson.

It generates the 2 MHz chop clock signal for triggering the chop counter (155-0010-00 aka M004) as well as the chop blanking waveform. The blanking waveform can be delayed in time and varied in width over a certain range to accommodate different delay lines. It also has five logical inputs which are the plug-in and mainframe modes that are used to decide if chop blanking should be used at a certain time.

Used in

Datasheet