3T4: Difference between revisions
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
manufacturer=Tektronix |series=560-series scopes |type= 3T4 | | manufacturer=Tektronix |series=560-series scopes |type= 3T4 | | ||
summary=Programmable Sampling Sweep | | summary=Programmable Sampling Sweep | | ||
image=3t4 front. | image=Tek 3t4 front.jpeg | | ||
caption=3T4 sweep unit | | caption=3T4 sweep unit | | ||
designers= | | designers= | | ||
Revision as of 11:41, 21 July 2023
The Tektronix Type 3T4 is a sampling sweep plug-in for 560-series scopes that is remotely programmable, allowing computer-controlled measurements of high-speed repetitive waveforms. It interfaces with a 6R1A plug-in in a Type 567 scope. It was introduced in 1965.
Specifications
The equivalent-time sweep rate ranges from 1 ns/div to 200 μs/div. There is a 10x calibrated horizontal magnification mode that can be selected, providing 100 ps/div horizontal scale. The maximum trigger frequency is 1 GHz.
The sweep can be controlled by the staircase ramp generator in the 3T4, manually by a front-panel knob, or remotely by a control voltage sent to the 3T4.
The remotely programmable functions are
- Equivalent-time sweep rate
- Delay time
- Samples per sweep
- Normal or single-display mode
- Single-display start
See Also
Pictures
-
front view
-
left view
-
right view
-
top view
-
bottom view
-
Description in 1965 Tek Catalog
-
In April 1965 SMPTE Journal
Some Parts Used in the 3T4
| Part | Part Number(s) | Class | Description | Used in |
|---|---|---|---|---|
| 8056 | 154-0417-00 | Vacuum Tube (Triode) | low-voltage Nuvistor triode | 422 • 502 • W • 1S1 • 3A7 • 3S3 • 3T4 • 5T3 • 10A1 |