7000 Series plug-in interface: Difference between revisions

7000 Series plug-in interface (view source)

1 byte removed , 11 April 2018

no edit summary

36,479

edits

Revision as of 13:33, 11 April 2018 (view source) Peter (talk \| contribs) No edit summary ← Older edit		Revision as of 22:44, 11 April 2018 (view source) Peter (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
	The [[7000-series scopes]] have two categories of slots, horizontal and vertical, that have partly different but compatible interconnects so that vertical ~~pplugins~~ can be installed in horizontal slots and vice versa, but not with all functions.		The [[7000-series scopes]] have two categories of slots, horizontal and vertical, that have partly different but compatible interconnects so that vertical plugins can be installed in horizontal slots and vice versa, but not with all functions.

	The interconnect is a 76-pin PCB edge connector. Pinout is given in the following table, where (H) indicates signals available in horizontal slots only, and (V) denotes signals available in vertical slots only.		The interconnect is a 76-pin PCB edge connector. Pinout is given in the following table, where (H) indicates signals available in horizontal slots only, and (V) denotes signals available in vertical slots only.