7000 Series plug-in interface: Difference between revisions

Jump to navigation Jump to search
no edit summary
No edit summary
No edit summary
Line 109: Line 109:
* ''Sweep Gate'' − 0/+5 V, high while sweep is running (beam unblanking); +Gate Output on mainframe uses Sweep Gate from H slot A when A Gate is selected, and from H slot B when B is selected
* ''Sweep Gate'' − 0/+5 V, high while sweep is running (beam unblanking); +Gate Output on mainframe uses Sweep Gate from H slot A when A Gate is selected, and from H slot B when B is selected
* ''Delay Mode Control'' − Output on delaying timebase in horizontal slot A, connected to input on delayed timebase in horizontal slot B.  >+3 V disables auto sweep in delayed timebase; 0 V enables independent timebase function.
* ''Delay Mode Control'' − Output on delaying timebase in horizontal slot A, connected to input on delayed timebase in horizontal slot B.  >+3 V disables auto sweep in delayed timebase; 0 V enables independent timebase function.
* ''A/B Sweep'' − 500 mV<sub>p-p</sub>, negative-going copy of sweep signal from timebase, used for mainframe's Sawtooth Out, additionally fed to V plugins
* ''A/B Sweep'' − 500 mV<sub>p-p</sub>, negative-going copy of sweep signal from timebase, not affected by X position control or magnifier; Used for mainframe's Sawtooth Out, additionally fed to V plugins
* ''Line Trigger'' − Approx. 1 V<sub>RMS</sub> mains-frequency signal from power supply (through transformer)
* ''Line Trigger'' − Approx. 1 V<sub>RMS</sub> mains-frequency signal from power supply (through transformer)
* ''Trigger Holdoff'' −
* ''Trigger Holdoff'' −

Navigation menu