36,345
edits
7000 Series plug-in interface: Difference between revisions
Jump to navigation
Jump to search
7000 Series plug-in interface (view source)
Revision as of 04:42, 12 September 2019
, 12 September 2019→Description of signals
| Line 113: | Line 113: | ||
| | | | ||
===Description of signals=== | ===Description of signals=== | ||
* ''Sweep Gate'' − 0/+5 V, high while sweep is running (beam unblanking), connected to + | * ''Sweep Gate'' − 0/+5 V, high while sweep is running (beam unblanking), connected to +5 V in amplifier plugins; +Gate Output on mainframe uses Sweep Gate from H slot A when A Gate is selected, and from H slot B when B is selected | ||
* ''Delay Mode Control'' − Output on delaying timebase in horizontal slot A, connected to input on delayed timebase in horizontal slot B. >+3 V disables auto sweep in delayed timebase; 0 V enables independent timebase function. Grounded in amplifier plugins. | * ''Delay Mode Control'' − Output on delaying timebase in horizontal slot A, connected to input on delayed timebase in horizontal slot B. >+3 V disables auto sweep in delayed timebase; 0 V enables independent timebase function. Grounded in amplifier plugins. | ||
* ''A/B Sweep'' − 500 mV<sub>p-p</sub>, negative-going copy of sweep signal from timebase, not affected by X position control or magnifier; Used for mainframe's Sawtooth Out, additionally fed to V plugins | * ''A/B Sweep'' − 500 mV<sub>p-p</sub>, negative-going copy of sweep signal from timebase, not affected by X position control or magnifier; Used for mainframe's Sawtooth Out, additionally fed to V plugins | ||
| Line 123: | Line 123: | ||
* ''Intensity Limit'' − Switched to ground by timebase in slow sweep speeds (≥100 ms/Div), limits beam intensity to protect the CRT [[phosphor]] | * ''Intensity Limit'' − Switched to ground by timebase in slow sweep speeds (≥100 ms/Div), limits beam intensity to protect the CRT [[phosphor]] | ||
* ''Mainframe Channel Switch'', ''Mainframe Mode'' − 0/+5 V logic levels; plug-in output is displayed when MF Channel Switch ≠ MF Mode (XOR) | * ''Mainframe Channel Switch'', ''Mainframe Mode'' − 0/+5 V logic levels; plug-in output is displayed when MF Channel Switch ≠ MF Mode (XOR) | ||
* ''Sweep Inhibit/Sweep Lockout'' - Mainframe injects current > | * ''Sweep Inhibit/Sweep Lockout'' - Mainframe injects current > 1 mA to prevent time base from sweeping. Used for ALT sequencing. | ||
* ''Delay Gate'' − negative-going pulse starting at the end of the delay period, and lasting until the end of the sweep from the delaying timebase. +Gate Output on mainframe uses Delay Gate from H slot B when Delay Gate is selected. Grounded in amplifier plugins. | * ''Delay Gate'' − negative-going pulse starting at the end of the delay period, and lasting until the end of the sweep from the delaying timebase. +Gate Output on mainframe uses Delay Gate from H slot B when Delay Gate is selected. Grounded in amplifier plugins. | ||
* ''Single sweep ready'' − 0/+5 V, high when single sweep is ready | * ''Single sweep ready'' − 0/+5 V, high when single sweep is ready | ||
| Line 129: | Line 129: | ||
* ''Signal'' − Signal output from plugin to mainframe. Differential, 50 Ω per side. 50 mV/Div (differential). | * ''Signal'' − Signal output from plugin to mainframe. Differential, 50 Ω per side. 50 mV/Div (differential). | ||
* ''Trigger'' − Copy of signal output from V plugin to mainframe. Differential, 50 Ω per side. 50 mV/Div (differential). Terminated on H slots. | * ''Trigger'' − Copy of signal output from V plugin to mainframe. Differential, 50 Ω per side. 50 mV/Div (differential). Terminated on H slots. | ||
* ''Dual Beam Aux Y-Axis'' − Used in dual beam mainframes ([[7844]]), Current-driven input to mainframe allowing vertical separation of two traces with dual timebase plugins. 1 mA/ | * ''Dual Beam Aux Y-Axis'' − Used in dual beam mainframes ([[7844]]), Current-driven input to mainframe allowing vertical separation of two traces with dual timebase plugins. 1 mA/Div sensitivity. | ||
* ''Single Sweep Logic'' − 0/+5 V; high level when time-base is in single sweep mode. | * ''Single Sweep Logic'' − 0/+5 V; high level when time-base is in single sweep mode. | ||
* ''Single Sweep Reset'' − Switched to ground to reset single sweep. | * ''Single Sweep Reset'' − Switched to ground to reset single sweep. | ||
* ''Aux Y-Axis'' − Current-driven input to mainframe allowing vertical separation of two traces with dual timebase plugins. | * ''Aux Y-Axis'' − Current-driven input to mainframe allowing vertical separation of two traces with dual timebase plugins. 1 mA/Div sensitivity. | ||
* ''Aux Z Axis'' − Current-driven input to mainframe allowing plugins to modulate beam intensity, e.g. in dual timebase A intensified by B display mode; driven only when plug-in output is displayed (see MF Ch Switch above) | * ''Aux Z Axis'' − Current-driven input to mainframe allowing plugins to modulate beam intensity, e.g. in dual timebase A intensified by B display mode; driven only when plug-in output is displayed (see MF Ch Switch above) | ||
* ''Trigger In'' − Trigger signal input on H plugin, routed from V plugin's trigger output. Differential, 50 Ω per side, 50 mV/Div (differential). | * ''Trigger In'' − Trigger signal input on H plugin, routed from V plugin's trigger output. Differential, 50 Ω per side, 50 mV/Div (differential). | ||
| Line 138: | Line 138: | ||
* ''GPIB lines'' − Control signal functions are the same as their [[GPIB interface|IEEE-488 (GPIB)]] equivalents. Time slot lines 2 to 9 double as IEEE-488 data lines. | * ''GPIB lines'' − Control signal functions are the same as their [[GPIB interface|IEEE-488 (GPIB)]] equivalents. Time slot lines 2 to 9 double as IEEE-488 data lines. | ||
* ''TS1−TS10'' − [[7000 series readout system|readout system]] time slot pulses. Idle 0, active −15 V. | * ''TS1−TS10'' − [[7000 series readout system|readout system]] time slot pulses. Idle 0, active −15 V. | ||
* ''Force Readout'' − | * ''Force Readout'' − Allows plug-in readout information to be displayed regardless of the mainframe mode switch setting when pulled low (<0.5 V). Used by many 7DXX plug-ins. | ||
* ''Plugin Mode'' − 5-level signal providing the mainframe with information about the operating mode of a dual-trace or dual-sweep plugin. | * ''Plugin Mode'' − 5-level signal providing the mainframe with information about the operating mode of a dual-trace or dual-sweep plugin. | ||
* ''Ch1/2 Row/Col'' − Analog current inputs to the readout system. Ch1 refers to the first channel within the plugin slot in question and is associated with the readout field on top of the screen. Ch2 is the 2nd channel displayed at the bottom. Row/Current signals accept negative currents in 100 μA steps; typically, plugins contain resistors from time slot signal lines to row/current lines. | * ''Ch1/2 Row/Col'' − Analog current inputs to the readout system. Ch1 refers to the first channel within the plugin slot in question and is associated with the readout field on top of the screen. Ch2 is the 2nd channel displayed at the bottom. Row/Current signals accept negative currents in 100 μA steps; typically, plugins contain resistors from time slot signal lines to row/current lines. | ||