39,764
edits
7000 Series plug-in interface: Difference between revisions
Jump to navigation
Jump to search
m
no edit summary
mNo edit summary |
|||
| Line 5: | Line 5: | ||
be unavailable − for example, trigger signals are only routed to H slots so a timebase in a V slot must be externally triggered. | be unavailable − for example, trigger signals are only routed to H slots so a timebase in a V slot must be externally triggered. | ||
Looking into the mainframe from the front panel, "A" pins are left of the connector centerline (on the [[Media:Tek-7a17-left-board.jpg|plug-in PCB's component side]]) and "B" are on the right (on the [[Media:Tek-7a17-right-board.jpg| | Looking into the mainframe from the front panel, "A" pins are left of the connector centerline (on the [[Media:Tek-7a17-left-board.jpg|plug-in PCB's component side]]) and "B" are on the right (on the [[Media:Tek-7a17-right-board.jpg|plug-in PCB's solder side]]). Pins are numbered from 1 at the bottom to 38 on the top. | ||
In the following table, (H) indicates signals available in horizontal slots only, (H-A) is horizontal slot A, (H-B) is horizontal slot B, and (V) denotes signals available in vertical slots only. | In the following table, (H) indicates signals available in horizontal slots only, (H-A) is horizontal slot A, (H-B) is horizontal slot B, and (V) denotes signals available in vertical slots only. | ||