P64xx input leads: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
Logic probes from the '''Tektronix P64xx series''' share a common 10-lead input connector layout. | Logic probes from the '''Tektronix P64xx series''' share a common 10-lead input connector layout. | ||
These probes include the [[P6406]], [[P6407]], [[P6408]], [[P6450]], [[P6451]], [[P6452]], [[P6460]], [[P6462]], and possibly others. | These probes include the [[P6406]], [[P6407]], [[P6408]], [[P6450]], [[P6451]], [[P6452]], [[P6455]], [[P6460]], [[P6462]], and possibly others. | ||
Original input lead sets were | Original input lead sets were |
Revision as of 13:28, 18 September 2017
Logic probes from the Tektronix P64xx series share a common 10-lead input connector layout.
These probes include the P6406, P6407, P6408, P6450, P6451, P6452, P6455, P6460, P6462, and possibly others.
Original input lead sets were
- 012-0747-00 - standard 10-wire 10 in/25 cm with pluggable probe tips
- 012-0989-00 - 10-wire 5 in/12 cm with pluggable probe tips
- 012-0655-01 - ten individual 40 cm leads
- 012-0655-02 - ten individual 8 cm leads
- 012-0670-00 - ten individual 16 cm leads
- 012-0800-00 - 10-wire 10 cm
As the the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch, it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
-
P6408 with 012-0747-00 harness and clips
-
Using P64xx probes with jumper wires