SD-44: Difference between revisions
Jump to navigation
Jump to search
(New page: SD44 Optical-to-electrical Converter From Tektronix' site: <blockquote> The SD44 is an optical-to-electrical (O/E) converter for use with the Tektronix CSA803 and 11800 Series sampling o...) |
No edit summary |
||
(11 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
{{Plugin Sidebar | |||
|manufacturer=Tektronix | |||
|series=11800-series scopes | |||
|type=SD-44 | |||
|summary=optical-to-electrical converter | |||
|image=Tek-sd44.jpg | |||
|caption=Tektronix SD-44 | |||
|introduced=(?) | |||
|discontinued=(?) | |||
|designers= | |||
|manuals= | |||
* [[Media:071-0061-01.pdf|Tektronix SD-44 Instruction Manual]] (PDF) | |||
}} | |||
The '''Tektronix SD-44''' is an Optical-to-electrical Converter plug-in for use with the [[CSA803]] and [[11801|11800 series]] sampling oscilloscopes equipped with an [[:Category:11800 series sampling plugins|SD2x or SD3x electrical sampling head]]. | |||
The SD44 Optical-to-electrical Converter can be plugged directly into a 11800 sampling slot, CSA803 power slot, [[016-1609-00]] power supply, or attached via a [[SD-Series_sampling_head_extenders|sampling head extender cable]] ([[012-1220-00]], 1 meter or [[012-1221-00]], 2 meters) for remote use. | |||
Optical signal input on the SD-44 is a standard [[FC/PC connector|FC/PC fiber optic connector]]. | |||
Other connector types can be accommodated by using hybrid fiber optic jumper cables (SA/SD42) or an assortment of hybrid mating adapters (SD44). The electrical signal output uses a [[3.5 mm connector]]. | |||
{{BeginSpecs}} | |||
Optical | {{Spec | Bandwidth | 15 GHz}} | ||
</ | {{Spec | Optical wavelength | 950-1650 nm}} | ||
{{Spec | Conversion factor | ≥ 35 mV/mW at 1310 and 1550 nm}} | |||
{{Spec | Nose equivalent power | ≤ 15 pW/√Hz into 50 Ω}} | |||
{{Spec | Internal Fiber | core: 9 μm single-mode fiber, cladding: 125 μm}} | |||
{{EndSpecs}} | |||
''please add'' | |||
<gallery> | |||
Tek sd44 front.jpg | |||
Tek sd44 left.jpg | |||
Tek sd-44 rear.jpg | |||
</gallery> | |||
[[Category:11800 series sampling plugins]] | |||
[[Category:Optoelectronic instruments]] |
Latest revision as of 10:24, 19 August 2021
The Tektronix SD-44 is an Optical-to-electrical Converter plug-in for use with the CSA803 and 11800 series sampling oscilloscopes equipped with an SD2x or SD3x electrical sampling head.
The SD44 Optical-to-electrical Converter can be plugged directly into a 11800 sampling slot, CSA803 power slot, 016-1609-00 power supply, or attached via a sampling head extender cable (012-1220-00, 1 meter or 012-1221-00, 2 meters) for remote use.
Optical signal input on the SD-44 is a standard FC/PC fiber optic connector. Other connector types can be accommodated by using hybrid fiber optic jumper cables (SA/SD42) or an assortment of hybrid mating adapters (SD44). The electrical signal output uses a 3.5 mm connector.
Key Specifications
Bandwidth | 15 GHz |
---|---|
Optical wavelength | 950-1650 nm |
Conversion factor | ≥ 35 mV/mW at 1310 and 1550 nm |
Nose equivalent power | ≤ 15 pW/√Hz into 50 Ω |
Internal Fiber | core: 9 μm single-mode fiber, cladding: 125 μm |
please add