SD-44: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
|series=11800-series scopes | |series=11800-series scopes | ||
|type=SD-44 | |type=SD-44 | ||
|summary= | |summary=optical-to-electrical converter | ||
|image=Tek-sd44.jpg | |image=Tek-sd44.jpg | ||
|caption=Tektronix SD-44 | |caption=Tektronix SD-44 | ||
| Line 10: | Line 10: | ||
|designers= | |designers= | ||
|manuals= | |manuals= | ||
* [ | * [[Media:071-0061-01.pdf|Tektronix SD-44 Instruction Manual]] (PDF) | ||
}} | }} | ||
The '''Tektronix SD-44''' is an Optical-to-electrical Converter plug-in for use with the [[CSA803]] and [[11801|11800 series]] sampling oscilloscopes equipped with an [[:Category:11800 series sampling plugins|SD2x or SD3x electrical sampling head]]. | The '''Tektronix SD-44''' is an Optical-to-electrical Converter plug-in for use with the [[CSA803]] and [[11801|11800 series]] sampling oscilloscopes equipped with an [[:Category:11800 series sampling plugins|SD2x or SD3x electrical sampling head]]. | ||
Latest revision as of 09:24, 19 August 2021
The Tektronix SD-44 is an Optical-to-electrical Converter plug-in for use with the CSA803 and 11800 series sampling oscilloscopes equipped with an SD2x or SD3x electrical sampling head.
The SD44 Optical-to-electrical Converter can be plugged directly into a 11800 sampling slot, CSA803 power slot, 016-1609-00 power supply, or attached via a sampling head extender cable (012-1220-00, 1 meter or 012-1221-00, 2 meters) for remote use.
Optical signal input on the SD-44 is a standard FC/PC fiber optic connector. Other connector types can be accommodated by using hybrid fiber optic jumper cables (SA/SD42) or an assortment of hybrid mating adapters (SD44). The electrical signal output uses a 3.5 mm connector.
Key Specifications
| Bandwidth | 15 GHz |
|---|---|
| Optical wavelength | 950-1650 nm |
| Conversion factor | ≥ 35 mV/mW at 1310 and 1550 nm |
| Nose equivalent power | ≤ 15 pW/√Hz into 50 Ω |
| Internal Fiber | core: 9 μm single-mode fiber, cladding: 125 μm |
please add
