91HS8: Difference between revisions
(adding specifics about the cabinet and interface cards.) |
No edit summary |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 4: | Line 4: | ||
|type=91HS8 | |type=91HS8 | ||
|summary=2 GHz data acquisition module | |summary=2 GHz data acquisition module | ||
|image= | |image=91hs8-e8_cabinet_front.jpeg | ||
|caption=Tektronix 91HS8 | |caption=Tektronix 91HS8/E8 cabinet | ||
|introduced=1986 | |introduced=1986 | ||
|discontinued=(?) | |discontinued=(?) | ||
|designers= | |designers= | ||
|manuals= | |manuals= | ||
* [[Media:070-5769-00.pdf|Service | * [[Media:070-5768-02.pdf|Operator's Manual Addendum]] | ||
* [[Media:070-5769-00.pdf|Service Manual Addendum]] | |||
}} | }} | ||
The '''91HS8''' (same as '''91HSE8''') is a 2 GHz data acquisition module for the [[DAS9100]]. It provides up to 32 channels at 2 GHz asynchronous. | The '''91HS8''' (same as '''91HSE8''') is a 2 GHz data acquisition module for the [[DAS9100]]. It provides up to 32 channels at 2 GHz asynchronous. | ||
| Line 27: | Line 28: | ||
==ROM images== | ==ROM images== | ||
''Please add'' | ''Please add'' | ||
<!-- i (nick) hope to dump the firmware from my 91HS8 card soon, then i can populate this.--> | |||
==Pictures== | ==Pictures== | ||
<gallery> | <gallery> | ||
91HS8card.jpg | 91HS8 | 91HS8card.jpg | 91HS8 interface card (from ebay listing) | ||
<!--my card is actually *the same exact card*, and the above image is from it's ebay listing. i just happened to buy it 5 years later...--> | |||
91hs8_interface_card_front.jpeg | 91HS8 interface card front | |||
91hs8_interface_card_rear.jpeg | 91HS8 interface card rear | |||
91hs8-e8_cabinet_front.jpeg | 91HS8/91HSE8 cabinet front | |||
91hs8-e8_cabinet_rear.jpeg | 91HS8/91HSE8 cabinet rear | |||
</gallery> | </gallery> | ||
[[Category:Logic analyzer add-ons]] | [[Category:Logic analyzer add-ons]] | ||
Latest revision as of 03:16, 20 June 2024
The 91HS8 (same as 91HSE8) is a 2 GHz data acquisition module for the DAS9100. It provides up to 32 channels at 2 GHz asynchronous. The add-on consists of an interface card that plugs into the DAS9100 and a self-contained acquisition cabinet that sits on top of the DAS. Nine probes are permanently attached to the back of the cabinet, one external trigger/alarm probe, and 8 acquisition channel probes. Channel width can be expanded to 32 channels by adding up to three 91HSE8 expander modules (91HSE8 interface cards, and cabinets).
The interface boards are the only difference between the 91HS8 and 91HSE8, the internal components of the cabinet for both are identical.
A similar unit (92HS8) with the same specifications was made available for the DAS9200.
Key Specifications
| Sampling rate | 2 GHz (500 ps sample interval) |
|---|---|
| Maximum number of channels | 32 channels |
| Memory depth | 8000 bits/channel (4000 bits/channel if glitch detection enabled) |
ROM images
Please add
Pictures
-
91HS8 interface card (from ebay listing)
-
91HS8 interface card front
-
91HS8 interface card rear
-
91HS8/91HSE8 cabinet front
-
91HS8/91HSE8 cabinet rear
