11201: Difference between revisions

Latest revision as of 05:48, 3 July 2024

Tektronix 11201

400 MHz sampling scope

Produced from 1989 to 1990

Manuals

Manual needed

ROM Images

File	Pos.	Checksum

160-5973-01
160-5974-01

(All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 11201 is a 400 MHz sampling oscilloscope. It does not take plug-ins, but it is electrically similar to the 11401 with two 11A32 plugins and uses the same firmware.

The 11201 is specified to have nine bits of vertical resolution whereas the 11401 and 11402 are specified to have ten bits of vertical resolution.

David White was the project manager for the 11201.

Key Specifications

please add

Internals

The 11201 has a card cage containing five boards:

I/O Board (A14)
Memory Management Unit Board (A15)
Compressor Board (A16)
Main Processor Board (A17)
Memory Board (A18)

The five boards plug into the card cage interconnect, which is completely passive. All card cage interconnects are 96-pin DIN 41612 connectors (3 rows of 32 pins each, also used for VME bus) that are wired identically.

The main microprocessor for the 11201 is an Intel 80286 with an 80287 math co-processor.

Pictures

Front, powered off
Rear

Displays

Trace
Instrument Options Screen

Internal

11201 Bottom internal
11201 Top internal
11201 Left internal
Right internal

Boards

11201 Acquisition Board
Waveform Compressor Board
Waveform Compressor Board
Memory Management Board
Memory Management Board
Memory Board
Memory Board
I/O Board
I/O Board
Processor Board
Processor Board
Acquisition Board
Timebase Board
Display Controller
Display Controller

Components

Some Parts Used in the 11201

Part	Part Number(s)	Class	Description	Used in
155-0239-00	155-0239-00 • 155-0239-01 • 155-0239-02	Hybrid integrated circuit	trigger	2424L • 2430 • 2430A • 2432 • 2445 • 2465 • 2467 • 2400-series scopes • 11201 • 11401 • 11402
155-0282-00	155-0282-00	Monolithic integrated circuit	D/A converter	11201 • 11401 • TSG-170 • TSG-271
155-0349-00	155-0349-00	Monolithic integrated circuit	custom	11201 • 11401
165-2065-02	165-2065-02	Hybrid integrated circuit	Time Interpolator	11201 • 11401 • 11402
Intel 80286		Monolithic integrated circuit	16-bit microprocessor	11201 • 11401 • 11402
Intel 80287		Monolithic integrated circuit	floating-point coprocessor	11201 • 11401 • 11402

@@ Line 13: / Line 13: @@
 * [[Media:Tek 11201 1989 catalog.pdf|Tektronix 11201 Description in 1989 Catalog]]
 * [[Media:Tek 11201 sales.pdf|Tektronix 11201 Product Annoucement]]
+{{ROM Images}}
+* 160-5973-01
+* 160-5974-01
 }}
 The '''Tektronix 11201''' is a 400 MHz sampling oscilloscope. It does not take plug-ins,
 but it is electrically similar to the [[11401]] with two 11A32 plugins and uses the same firmware.
-The 11201 is specified to have nine bits of vertical resolution
-whereas the 11401 and 11402 are specified to have ten bits of vertical resolution.
+The 11201 is specified to have nine bits of vertical resolution whereas the 11401 and 11402 are specified to have ten bits of vertical resolution.
 [[David White]] was the project manager for the 11201.
-The main microprocessor for the 11201 is an [[Intel 80286]] with an 80287 math co-processor.
+{{MissingSpecs}}
+==Internals==
 The 11201 has a card cage containing five boards:
 # I/O Board (A14)
@@ Line 30: / Line 34: @@
 # Memory Board (A18)
 The five boards plug into the card cage interconnect, which is completely passive.
-All card cage interconnect connectors have 96 pins and are wired identically.
+All card cage interconnects are 96-pin DIN 41612 connectors (3 rows of 32 pins each, also used for VME bus) that are wired identically.
-The connectors have three rows of 32 pins each and resemble VME connectors.
+The main microprocessor for the 11201 is an [[Intel 80286]] with an 80287 math co-processor.
-==Specifications==
-[[Category:Specifications needed]] ''please add''
 ==Pictures==