Probe power: Difference between revisions

Revision as of 00:33, 21 September 2017

Many Tektronix instruments provide power for active probes. There have been several distinct versions:

The 513 provides +225 V, +6.3 V, and a variable supply producing +15 V to +150 V.
The 517 and 128 provide +120 V and +6.3 V.
The 3S1 provides +100 V and -12.2 V.
The 4S1 provides +100 V, -12.6 V, and -25.2 V.
The 015-0073-00 provides +12.5 V and -12.5 V for probes P6045, ...
7000-series scopes (not all models), 475, 485, the 1101 probe power supply, and the 2707 tracking generator provide +15 V, +5 V, and -15 V through a LEMO S-series connector.
TekProbe BNC, TekProbe SMA and TekConnect are proprietary probe-scope interfaces that combine signal and probe power as well as control (e.g. offset voltage), and provide the scope with information about the type of probe is connected.

@@ Line 7: / Line 7: @@
 * The [[4S1]] provides +100 V, -12.6 V, and -25.2 V.
 * The [[015-0073-00]] provides +12.5 V and -12.5 V for probes [[P6045]], ...
-* [[7000-series scopes]] (not all models), [[475]], [[485]] and the [[1101]] probe supply provide +15 V, +5 V, and -15 V through a [[LEMO S-series connector]].
+* [[7000-series scopes]] (not all models), [[475]], [[485]], the [[1101]] probe power supply, and the [[2707]] tracking generator provide +15 V, +5 V, and -15 V through a [[LEMO S-series connector]].
 * [[Tekprobe BNC connector|TekProbe BNC]], [[Tekprobe SMA connector|TekProbe SMA]] and [[TekConnect interface|TekConnect]] are proprietary probe-scope interfaces that combine signal and probe power as well as control (e.g. offset voltage), and provide the scope with information about the type of probe is connected.