P6406: Difference between revisions
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
The '''Tektronix P6406''' is a 16-channel word recognizer probe for the [[308]] logic analyzer. | The '''Tektronix P6406''' is a 16-channel word recognizer probe for the [[308]] logic analyzer. | ||
The | The P6406 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs. | ||
==Internals== | ==Internals== | ||
Revision as of 12:02, 18 September 2017
The Tektronix P6406 is a 16-channel word recognizer probe for the 308 logic analyzer.
The P6406 uses the P64xx-family 10-wire input lead harnesses with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
Internals
The 16 inputs connect (via 330 Ω resistors) to inputs of four 74LS266 quad exclusive-NOR gates that receive bit-inversion masks from two of three 74LS164 serial-in, parallel-out shift registers. The third shift register provides don't care masks (one per group of four inputs). After the logic circuits, a 74S140 cable driver sends the trigger signal to the 308.
Links
Pictures
-
P6406 probe
-
P6406 case close-up
-
P6406 PCB front
-
P6406 PCB back
-
Using P6406/P6451 probes with jumper wires
