7A29: Difference between revisions
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
* [http://w140.com/smb/7a29_sm.pdf Tektronix 7A29 (OCR, PDF)] | * [http://w140.com/smb/7a29_sm.pdf Tektronix 7A29 (OCR, PDF)] | ||
}} | }} | ||
The '''Tektronix 7A29''' is a 1 GHz single-channel vertical plug-in for [[7000-series scopes]]. | The '''Tektronix 7A29''' is a 1 GHz single-channel vertical plug-in for [[7000-series scopes]]. | ||
It is primarily intended for the [[7103]] and [[7104]]. | |||
Like with the [[7A19]], a variable signal delay was available as an option. | Like with the [[7A19]], a variable signal delay was available as an option. | ||
There is also a [[7A29P]], which has digitally programmable gain, intended for the [[:Category:7000 series digitizer mainframes|7000 series digitizers]] and the [[7854]] only. | There is also a [[7A29P]], which has digitally programmable gain, | ||
intended for the [[:Category:7000 series digitizer mainframes|7000 series digitizers]] and the [[7854]] only. | |||
The [[7F10]] uses the 7A29's amplifier board after the optical/electrical converter. | The [[7F10]] uses the 7A29's amplifier board after the optical/electrical converter. | ||
Revision as of 16:24, 3 February 2018
Template:Plugin Sidebar 2 The Tektronix 7A29 is a 1 GHz single-channel vertical plug-in for 7000-series scopes. It is primarily intended for the 7103 and 7104. Like with the 7A19, a variable signal delay was available as an option.
There is also a 7A29P, which has digitally programmable gain, intended for the 7000 series digitizers and the 7854 only.
The 7F10 uses the 7A29's amplifier board after the optical/electrical converter.
Key Specifications
| Bandwidth | 1 GHz (in 7104) |
|---|---|
| Input impedance | 50±1 Ω, VSWR <1.2:1 from DC to 1 GHz (10 mV/Div: 1.4:1, Opt.4: 1.5:1) |
| Max. input | max. 10 VRMS or 1 Ws pulses not exceeding 50 V; max. 100 V additional DC component in AC mode |
| Deflection | 10 mV/div to 1 V/div, 1-2-5, ±2%; variable 2.5:1 |
| Channels | Single channel |
| Recommended probes | P6056 (×10), P6057 (×100) |
| Options | Option 4: variable delay (1 ns) |
Internals
The 7A29 employs a number of Tek-made custom Hypcon-packaged hybrids, the 155-0180-00 fast input protection, 155-0181-00 input amplifier and 155-0175-00 trigger amplifier (2 ×).
It uses a "feed-beside" scheme implemented with standard low-frequency operational amplifiers to compensate for low-frequency anomalies in the frequency response that are attributed to transistor heating.
The input connector is a special Tek-made part that is exactly 50 Ω. Typical BNC connectors are around 52 Ω.
Links
- Tektronix 7A29 teardown - nice detailed pictures of attenuator internals
- Tek 7A29P @ amplifier.cd including internal pictures
Pictures
-
7A29 (no opt.) front
-
7A29 Opt.4 front
-
7A29P
-
photo of 7A29 from manual (standard and option 4 units)
Internal
-
7A29 (no opt.), left side (fixed delay line)
-
7A29 Opt.4, left view (variable delay line enclosure above PCB)
-
7A29, right side
-
7A29 input protection relay
-
7A29 input protection relay lever
-
7A29 backplane connector (stripline signal path)
-
7A29 amplifiers
-
7A29, right side, rear
-
7A29, right side, front
Schematics
-
input amplifier schematic
-
output amplifier schematic
