500-series plug-ins (Letter-series and 1-series): Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 27: Line 27:
Type w front.jpg        | '''[[W]]''' - 23 MHz, differential comparator, 1965
Type w front.jpg        | '''[[W]]''' - 23 MHz, differential comparator, 1965
Type Z front.jpg        | '''[[Z]]''' - 13 MHz, differential comparator, 1960
Type Z front.jpg        | '''[[Z]]''' - 13 MHz, differential comparator, 1960
Tek 1a1 front.jpg        | '''[[1A1]]''' - 50 MHz, dual channel, 1964
Tek 1A1 front.jpg        | '''[[1A1]]''' - 50 MHz, dual channel, 1964
Tek 1a2 front.jpg        | '''[[1A2]]''' - 50 Mhz, dual channel, 1964
Tek 1a2 front.jpg        | '''[[1A2]]''' - 50 Mhz, dual channel, 1964
1a4 front.jpg            | '''[[1A4]]''' - 50 MHz, four channel, 1967
1a4 front.jpg            | '''[[1A4]]''' - 50 MHz, four channel, 1967

Revision as of 10:55, 12 May 2019

These plug-ins fit in 500-series scopes and in external power supply units such as the 127, 132, and 133. They use the 500-series plug-in interface.

Tektronix made plug-ins

  • A - 20 MHz, single channel, 1959 (53A: 1954)

    A - 20 MHz, single channel, 1959 (53A: 1954)

  • B - Same as A, with an extra 10× of gain, 1954

    B - Same as A, with an extra 10× of gain, 1954

  • C - 8.5 MHz, dual channel

    C - 8.5 MHz, dual channel

  • CA - 24 MHz, dual channel

    CA - 24 MHz, dual channel

  • D - 2 MHz, differential, 1954

    D - 2 MHz, differential, 1954

  • E - 60 kHz, high gain differential, 1955

    E - 60 kHz, high gain differential, 1955

  • F - Became the 1A7 before going into production

    F - Became the 1A7 before going into production

  • G - 20 MHz, differential, 1955

    G - 20 MHz, differential, 1955

  • H - 15 MHz, single channel, 1958

    H - 15 MHz, single channel, 1958

  • J - Aborted, similar to 1A1, 1963

    J - Aborted, similar to 1A1, 1963

  • K - 30 MHz, single channel, 1955

    K - 30 MHz, single channel, 1955

  • L - Same as K, with an extra 10× of gain, 1957

    L - Same as K, with an extra 10× of gain, 1957

  • M - 20 MHz, four channel, 1962

    M - 20 MHz, four channel, 1962

  • N - 600 MHz, sampling, 1960

    N - 600 MHz, sampling, 1960

  • O - 25 MHz, op-amp, 1962

    O - 25 MHz, op-amp, 1962

  • P - Calibration aid, pulser, 1959

    P - Calibration aid, pulser, 1959

  • Q - Transducer driver, 1960

    Q - Transducer driver, 1960

  • R - Transistor rise-time tester, 1958

    R - Transistor rise-time tester, 1958

  • S - Diode recovery tester, 1960

    S - Diode recovery tester, 1960

  • T - Single time base, 1957

    T - Single time base, 1957

  • V - Aborted, video

    V - Aborted, video

  • W - 23 MHz, differential comparator, 1965

    W - 23 MHz, differential comparator, 1965

  • Z - 13 MHz, differential comparator, 1960

    Z - 13 MHz, differential comparator, 1960

  • 1A1 - 50 MHz, dual channel, 1964

    1A1 - 50 MHz, dual channel, 1964

  • 1A2 - 50 Mhz, dual channel, 1964

    1A2 - 50 Mhz, dual channel, 1964

  • 1A4 - 50 MHz, four channel, 1967

    1A4 - 50 MHz, four channel, 1967

  • 1A5 - 50 MHz, differential, 1967

    1A5 - 50 MHz, differential, 1967

  • 1A6 - 2 MHz, differential, 1967

    1A6 - 2 MHz, differential, 1967

  • 1A7 - 1 MHz, high gain differential, 1966

    1A7 - 1 MHz, high gain differential, 1966

  • 1S1 - 1 GHz, sampling, 1965

    1S1 - 1 GHz, sampling, 1965

  • 1S2 - 3.9 GHz, sampling and TDR, 1967

    1S2 - 3.9 GHz, sampling and TDR, 1967

  • 1L5 - 50 Hz to 1 MHz Spectrum Analyzer, 1967

    1L5 - 50 Hz to 1 MHz Spectrum Analyzer, 1967

  • 1L10 - 1 MHz to 36 MHz Spectrum Analyzer, 1965

    1L10 - 1 MHz to 36 MHz Spectrum Analyzer, 1965

  • 1L20 - 10 MHz to 4.2 GHz, Spectrum Analyzer, 1964

    1L20 - 10 MHz to 4.2 GHz, Spectrum Analyzer, 1964

  • 1L30 - 925 MHz to 10.5 GHz Spectrum Analyzer

    1L30 - 925 MHz to 10.5 GHz Spectrum Analyzer

  • 1L40 - 1.5 GHz to 40 GHz Spectrum Analyzer

    1L40 - 1.5 GHz to 40 GHz Spectrum Analyzer

  • 1L60 − 150 to 250 MHz Spectrum Analyzer

    1L60 − 150 to 250 MHz Spectrum Analyzer

  • 1M1 - Calibration aid, 1964

    1M1 - Calibration aid, 1964

  • TU-2 - Calibration aid

    TU-2 - Calibration aid

  • TU-7 - Same as 1M1

    TU-7 - Same as 1M1

Non-Tektronix plug-ins

... that also work in 500-series scopes include, but are probably not limited to:

Retrieved from "https://w140.com/tekwiki/index.php?title=500-series_plug-ins_(Letter-series_and_1-series)&oldid=45328"