7A12: Difference between revisions
Jump to navigation
Jump to search
m (→top: clean up, replaced: {{Plugin Sidebar 2| → {{Plugin Sidebar |, title=Tektronix → manufacturer=Tektronix | type=) |
No edit summary |
||
| Line 6: | Line 6: | ||
introduced=1969 | | introduced=1969 | | ||
discontinued=1974 | | discontinued=1974 | | ||
series= | series=7000-series scopes| | ||
manuals= | manuals= | ||
* [http://bama.edebris.com/download/tek/7a12/tek-7a12.pdf Tektronix 7A12 Manual (PDF)] | * [http://bama.edebris.com/download/tek/7a12/tek-7a12.pdf Tektronix 7A12 Manual (PDF)] | ||
Revision as of 02:34, 9 August 2021
The Tektronix 7A12 is a 120 MHz dual-trace vertical plug-in for 7000-series scopes.
Switches on the front panel control miniature relays in the signal path, such as those selecting input attenuators, through logic circuits. It uses the 155-0032-00 as a gain stage and the 155-0022-00 for channel switching.
The 7A12 was designed by Roy Hayes (who also designed the 3A3 and 3A8 before leaving for HP Loveland in Jan 1971). The Evaluation Engineer for the 7A12 was Peter Starič, co-author of the book "Wideband Amplifiers" with Erik Margan.
Key Specifications
| Bandwidth | 120 MHz (79xx) / 105 MHz (77xx) / 55 MHz (74xx) |
|---|---|
| Deflection | 5 mV/Div to 5 V/Div (1–2–5), variable up to 12.5 V/Div |
| Input impedance | 1 MΩ // 24 pF |
| Maximum input | 5 V (0.5 W) − no damage below 10 V (2 W) |
| Timing | Delay difference between channels < 500 ps |
| Channel Isolation | At least 3000:1 at 75 MHz |
| Maximum Input Voltage | 350 V DC + Peak AC at 1 kHz or less |
Links
Pictures
-
Front view
-
Front view
-
Attenuator schematic with relays
-
7A12 Amplifier PCB
