P6406: Difference between revisions
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
The P6406 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs. | The P6406 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs. | ||
{{MissingSpecs}} | |||
==Internals== | ==Internals== | ||
Revision as of 12:10, 18 September 2017
The Tektronix P6406 is a 16-channel word recognizer probe for the 308 logic analyzer.
The P6406 uses the P64xx-family 10-wire input lead harnesses with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
Key Specifications
- please add
Internals
The 16 inputs connect (via 330 Ω resistors) to inputs of four 74LS266 quad exclusive-NOR gates that receive bit-inversion masks from two of three 74LS164 serial-in, parallel-out shift registers. The third shift register provides don't care masks (one per group of four inputs). After the logic circuits, a 74S140 cable driver sends the trigger signal to the 308.
Links
Pictures
-
P6406 probe
-
P6406 case close-up
-
P6406 PCB front
-
P6406 PCB back
-
Using P6406/P6451 probes with jumper wires
