TM503: Difference between revisions

Revision as of 06:35, 14 July 2021

Tektronix TM503
three-bay mainframe Tektronix TM503 Produced from 1972 to (?) Manuals Tektronix TM503 Manual (PDF) (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix TM503 is a three-bay mainframe for the TM500 system. All bays are low-power. It has a swivelling carrying handle.

The TM503B also allows the power supply/backplane part to be removed from the case so that modules to be repaired on the bench without using extenders (see link below). It also has openings for the TM5000 GPIB feature, but not the connectors nor the power good signal for TM5000 plugins.

Option 2

Option 2 adds internal pin headers for each slot as well as rear 50-pin and BNC connectors, allowing for custom wiring to, from and between plugins.

On the standard TM503, cutouts for three BNC sockets have been made in the rear frame, meaning that the user only needs to drill holes in the rear cover plate to install the sockets.

Option 7

Option 7 adds barrier keys (214-1593-02) and connections on the rear interface to allow connections between the DC502-option7 to either a TR502 or a SW503 such that the center or marker frequency of a sweep can be read of the DC502.

Key Specifications

please add

Links

TM503B @ amplifier.cd
TM503 repair @ paulcarbone.com
The Tektronix Function Generator Teardown - Paul Rako @ electronicdesign.com

Pictures

TM503 inside
TM503 backplane
TM503 PSU
TM503B Front view with plugins
TM503B Front view with PG502, SG504 and RO510 plugins
TM503B Front view without plugins
TM503B internal view
TM503B side view
TM503B rear view
TM503B top view
TM503B bottom view
TM503B power supply front view
TM503B power supply top view
TM503B power supply rear view
Using a TM503B for repairing plugins
Using a TM503B for repairing plugins

Schematics

TM503 schematic
Block diagram
Interface connectors

@@ Line 1: / Line 1: @@
-[[File:Tek pg501 sc502.jpg | thumb | 300px | right | '''TM503 enclosure''' with [[PG501 | PG501 pulse generator]] and [[SC502 | SC502 oscilloscope]]]]
+{{TM500 mainframe | mfg=Tektronix | type=TM503 | function=three-bay mainframe | image=Tek pg501 sc502.jpg | introduced=1972 | discontinued=(?) |
-The '''Tektronix TM503''' is a 3-bay mainframe for the [[TM500 system]].  All bays are low-power.
+manuals=
+* [http://w140.com/tm503.pdf Tektronix TM503 Manual (PDF)]
-The '''TM503A''' has a swivelling carrying handle.
+}}
+All bays are low-power. It has a swivelling carrying handle.
 The '''TM503B''' also allows the power supply/backplane part to be removed from the case so that modules to be repaired on the bench without using extenders (see link below).  It also has openings for the [[TM5000]] GPIB feature, but not the connectors nor the power good signal for TM5000 plugins.
@@ Line 13: / Line 14: @@
 ==Option 7==
 Option 7 adds barrier keys (214-1593-02) and connections on the rear interface to allow connections between the [[DC502]]-option7 to either a [[TR502]] or a [[SW503]] such that the center or marker frequency of a sweep can be read of the DC502.
-==Manuals==
-* [http://w140.com/tm503.pdf Tektronix TM503 Manual (PDF)]
 {{MissingSpecs}}
@@ Line 50: / Line 48: @@
 TM503-interface.jpg | Interface connectors
 </gallery>
-[[Category:TM500 mainframes]]
-[[Category:Introduced in 1972]]