3S6: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
m (→‎top: clean up, replaced: title=Tektronix → manufacturer=Tektronix |series=560-series scopes |type=, {{Plugin Sidebar 2 → {{Plugin Sidebar, series=560-series scopes → designers=)
Line 1: Line 1:
{{Plugin Sidebar 2 |
{{Plugin Sidebar |
title=Tektronix 3S6 |
manufacturer=Tektronix |series=560-series scopes |type= 3S6 |
summary=Sampling plug-in |
summary=Sampling plug-in |
image=3S6_front.JPG |
image=3S6_front.JPG |
caption=3S6 front |
caption=3S6 front |
series=[[560-series scopes]] |
designers= |
introduced=1969 |
introduced=1969 |
discontinued=(?) |
discontinued=(?) |
Line 13: Line 13:
The '''Tektronix 3S6''' is a dual-trace [[sampling_oscilloscope|sampling]] module for [[560-series_scopes]], particularly the [[568]].
The '''Tektronix 3S6''' is a dual-trace [[sampling_oscilloscope|sampling]] module for [[560-series_scopes]], particularly the [[568]].


It interfaces with the sampling heads through a connector on its rear panel (using  
It interfaces with the sampling heads through a connector on its rear panel (using [[S-series sampling head extenders]]).  
[[S-series sampling head extenders]]). It is programmable, allowing settings such as  
It is programmable, allowing settings such as mV/cm to be controlled by an external programming unit such as the Tektronix Type [[240]].
mV/cm to be controlled by an external programming unit such as the Tektronix Type [[240]].


In a typical setup, the programming unit is connected to the 568 using a
In a typical setup, the programming unit is connected to the 568 using amulti-conductor cable.   
multi-conductor cable.  The 568 routes those signals to the plug-ins.
The 568 routes those signals to the plug-ins.


==Specifications==
==Specifications==

Revision as of 12:36, 14 August 2021

Tektronix 3S6
Sampling plug-in
3S6 front

Compatible with 560-series scopes

Produced from 1969 to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 3S6 is a dual-trace sampling module for 560-series_scopes, particularly the 568.

It interfaces with the sampling heads through a connector on its rear panel (using S-series sampling head extenders). It is programmable, allowing settings such as mV/cm to be controlled by an external programming unit such as the Tektronix Type 240.

In a typical setup, the programming unit is connected to the 568 using amulti-conductor cable. The 568 routes those signals to the plug-ins.

Specifications

please add

Links

Pictures